IR NEC: shows address and command, or “NEC repeat”
IR RC5: shows address, command
DHT11 / DHT22: shows the raw bytes
1-Wire: shows reset with or without presence, then bytes. The first byte after a reset is […]
IR NEC: shows address and command, or “NEC repeat”
IR RC5: shows address, command
DHT11 / DHT22: shows the raw bytes
1-Wire: shows reset with or without presence, then bytes. The first byte after a reset is […]
➡️ https://github.com/bonezegei/Bonezegei_DHT22
DHT22
#ArduinoLibs #ArduinoLibraries
➡️ https://github.com/bonezegei/Bonezegei_DHT22
DHT22
#ArduinoLibs #ArduinoLibraries
➡️ https://github.com/me1121118/praph
ESP8266 IoT controller with Blynk SSL, DHT22 sensor, and 4-channel relay control
#ArduinoLibs #ArduinoLibraries #esp8266Libraries
➡️ https://github.com/me1121118/praph
ESP8266 IoT controller with Blynk SSL, DHT22 sensor, and 4-channel relay control
#ArduinoLibs #ArduinoLibraries #esp8266Libraries
weil die Optokoppler nicht bidirektional sind, gibt es einen pin für in und einen für out, beim DHT22 muss Mensch dann den in und out pin separat benennen, der out dann mit _o
weil die Optokoppler nicht bidirektional sind, gibt es einen pin für in und einen für out, beim DHT22 muss Mensch dann den in und out pin separat benennen, der out dann mit _o