#EPDG
Wi-Fi Calling where there is no cellular signal: what the phone, ePDG and IMS do on the call path
Picture a farmhouse with working home broadband and no cellular signal. The phone shows no bars, yet a Wi-Fi call can still go through. What does the phone actually do on that path, and which parts of the operator's core have to be running? Apple's iPhone guide tells users to turn to Wi-Fi Calling when there is a Wi-Fi connection in an area with little or no cellular coverage. Researchers note that many operators use VoWiFi to complement cellular coverage where no radio signal is available, for example in rural territories or shielded buildings. For an engineer, the useful question is what that path consists of, node by node. ## Does Wi-Fi Calling need a cellular signal? No cellular radio signal is needed, but the operator's core network is. Without a signal the phone loses radio access. The 3GPP AAA server still gets the authentication vectors from the HSS or HLR if it does not already have them. The PDN gateway still reaches the packet data network, which can be an operator's own network that provides IMS services. The phone reaches this core over Wi-Fi. The 3GPP architecture defines how non-3GPP accesses, Wi-Fi among them, get IP connectivity to the Evolved Packet Core. When the terminal supports 3GPP access, the credentials used with EAP-AKA reside on the UICC (the SIM). After the challenge succeeds, the operator's 3GPP AAA server checks in the user's subscription that the user is authorized for non-3GPP access. In a non-roaming case the home operator decides how a Wi-Fi network is used, as trusted or as untrusted. GSMA IR.51 is the profile for IMS voice, video and SMS over untrusted Wi-Fi. It covers WLAN access to the EPC via the untrusted S2b interface and does not cover trusted access over S2a. Each step of the call path has an owner. The whole path for untrusted Wi-Fi without roaming (S2b) fits in one table. Step | Who acts | What happens ---|---|--- 1 | Phone, Wi-Fi network | The phone gets a local IP address from the Wi-Fi network 2 | Phone, ePDG | The phone selects an ePDG and starts an IPsec tunnel to it; the tunnel runs over SWu 3 | Phone, ePDG, 3GPP AAA server | The phone and the AAA server authenticate each other, and the ePDG relays their messages 4 | ePDG, AAA server, PDN gateway | The PDN gateway is selected using subscriber data the HSS gives to the AAA server, and the ePDG then reaches it over S2b 5 | Phone, IMS | The phone can ask for P-CSCF addresses in IKEv2, then registers in IMS 6 | Phone, IMS | SIP signalling and media can travel inside the IPsec tunnel ## How does the phone find the ePDG? Before it can pick an ePDG, the phone has to know which country it is in. The architecture leaves the method to the implementation, and if the phone cannot determine the country, it stops ePDG selection. The access signalling specification notes that with a 3GPP radio network in coverage the phone can compare the PLMN's MCC with its IMSI, and that out of 3GPP coverage it can use other techniques, including user-provided location. A phone in its home country that has no home ePDG identifier configured builds the ePDG name from the home network’s PLMN ID (the MCC and MNC of its IMSI). The name follows the pattern from the 3GPP numbering specification: epdg.epc.mnc<MNC>.mcc<MCC>.pub.3gppnetwork.org MNC and MCC are each coded with three digits, so a two-digit MNC gets a leading zero in the name. The phone resolves this name with standard DNS and picks an ePDG address of the same IP version as its local address. GSMA IR.51 notes that the DNS queries go to the DNS server provided on the Wi-Fi internet connection. Failures matter too. If the phone in its home country cannot select an ePDG in the home network, it stops ePDG selection. A phone can tell that a Wi-Fi network restricts access to the core if it gets no IKEv2 response to its IKE_SA_INIT request. Apple lists connecting to a different Wi-Fi network among the things to try when Wi-Fi Calling is not working. ## How does the phone prove who it is over untrusted Wi-Fi? Our blog post on TWAG and ePDG says untrusted access suits any network, including a subscriber's home router or Wi-Fi in a coffee shop, and that the operator has no control over such a network. In the standard, whether a Wi-Fi network is trusted is the operator's decision. The post adds that on untrusted Wi-Fi the phone protects the traffic itself: it builds an IPsec tunnel to the ePDG, and the ePDG hands the session to the core over S2b. The tunnel starts with an IKE_SA_INIT request that sets up the IKEv2 security association. The following IKE_AUTH request carries the APN for a non-emergency session in the IDr payload. The phone is authenticated with EAP-AKA inside IKEv2. EAP-AKA' is required for trusted-access authentication, while tunnel setup with the ePDG allows only EAP-AKA. Step by step, the exchange runs like this: 1. The ePDG extracts the EAP messages the phone sends over IKEv2 and passes them to the 3GPP AAA server over SWm. SWm reuses the DER and DEA commands of the Diameter EAP application. 2. The AAA server fetches the authentication vectors from the HSS or HLR if it does not already have them. 3. The ePDG answers the phone's IKE_AUTH request with its identity and, if requested, a certificate. It also carries the AAA server's EAP-Request/AKA-Challenge. The certificate-based signature is how the ePDG authenticates itself to the phone. 4. The phone checks the authentication parameters and answers in a new IKE_AUTH request with the EAP-Response/AKA-Challenge. The ePDG forwards it to the AAA server. 5. After success the AAA server sends EAP-Success and the MSK to the ePDG, which relays EAP-Success to the phone. The phone derives its own copy of the MSK, and both sides use it to compute the AUTH parameters that authenticate the IKE_SA_INIT messages. The phone can also change networks later. Its IKE_AUTH request may carry an indication that it supports MOBIKE. If such a phone changes its local IP address, it updates the IKE and IPsec security associations and sends an INFORMATIONAL request with UPDATE_SA_ADDRESSES to the ePDG. The architecture describes handover between two untrusted Wi-Fi accesses on the same ePDG the same way: the tunnel is modified, not torn down and re-created. ## What does the ePDG do between the tunnel and the core? The ePDG sits between the IPsec tunnel and the AAA and packet side. It terminates the IKEv2 signalling and relays it as AAA messages. Tunnel authentication and authorization data travel over SWm, the reference point to the 3GPP AAA server. The choice of the gateway comes next. The ePDG checks that the APN the phone asked for is allowed by subscription, or uses the default APN, and then selects the PDN gateway. The selection uses subscriber information the HSS provides through the AAA server; for a new connection the ePDG typically resolves the gateway via DNS, while a gateway already assigned (for example, before a handover) comes from the AAA server. The selected gateway informs the AAA server of its identity, and the AAA server tells the HSS the gateway identity and the APN. S6b is the reference point between the gateway and the AAA server. S2b then provides the user plane with related control and mobility support between the ePDG and the gateway. Uplink packets go from the phone into the IPsec tunnel to the ePDG, which tunnels them to the PDN gateway. Downlink works in the opposite direction. The phone ends up with two kinds of IP address: one from the Wi-Fi network to reach the ePDG, and one or more for external PDNs via the PDN gateway. The second kind can come from the PDN gateway or from an external PDN, and the ePDG delivers it to the phone. The phone gets it in the CFG_REPLY payload of the IKE_AUTH response. When you read a trace, keep the two addresses apart: the first reaches the ePDG, the second goes towards the packet data network. ## How does the phone reach IMS and register? The PDN gateway reaches the packet data network over SGi, and that network can be an operator's own network that provides IMS services. GSMA IR.51 says SIP signalling uses the IMS well-known APN, and the phone sets up a separate IPsec tunnel for the PDN connection to that APN. For S2b over untrusted WLAN, the tunnel stays active for as long as the phone is connected to the IMS, from the initial registration at least until deregistration. The P-CSCF comes next. To find it, the phone can ask for its addresses in the IKEv2 configuration payload. If addresses are returned, they come in the CFG_REPLY of the IKE_AUTH response. The attributes are P_CSCF_IP4_ADDRESS and P_CSCF_IP6_ADDRESS. The IMS signalling specification lists this as one discovery method next to DHCP (with DNS resolution of the returned name) and the IMS management object. GSMA IR.51 requires these attributes for untrusted access. Registration follows. The phone may carry both SIP signalling and media inside the IPsec ESP security association. After a 401 response to its REGISTER request, the phone picks the topmost WWW-Authenticate header it supports, where the algorithm is AKAv2-SHA-256 or AKAv1-MD5 (IMS AKA). IMS AKA gives mutual authentication between the ISIM and the home network, and the HSS and the ISIM share a long-term key tied to the private user identity. Why does the IMS side look familiar to anyone who has launched VoLTE? GSMA IR.51, the Wi-Fi profile, is based on the IMS voice and SMS profile IR.92 and points to IR.92 for call establishment and termination. IR.92 identifies the minimum mandatory set of 3GPP features a phone and the network must implement for interoperable IMS-based telephony over LTE radio access. The IMS architecture adds the access-specific concepts for IMS over untrusted WLAN access to the EPC. ## What changes for emergency calls, roaming and handover? Emergency calls come first. A phone may start an emergency session over WLAN access to the EPC only when 3GPP access for the emergency call is not possible or available, for example with no 3GPP coverage. Then it sets up an emergency PDN connection and performs an IMS emergency registration before the session request, and it includes any available location information. It also selects an ePDG that supports emergency services. Apple's guide says that enabling Wi-Fi Calling may ask the user to enter or confirm an address for emergency services. For handover, the PDN gateway is the user plane anchor for mobility between 3GPP and non-3GPP access. GSMA IR.51 requires a phone that supports untrusted access to support handover from LTE to Wi-Fi and from Wi-Fi to LTE as described in the 3GPP architecture. GSMA IR.51 says the phone keeps using the P-CSCF it selected when the IMS connection moves between the two. In a roaming case, the HSS and 3GPP AAA server in the home network make the final decision whether the Wi-Fi network is used as trusted or untrusted. A phone outside its home country that is not attached over 3GPP access performs a DNS query to learn whether the visited country mandates ePDG selection in that country. ## What does our Stingray ePDG cover on this path? Stingray ePDG lets an operator or MVNO launch Wi-Fi Calling (VoWiFi), voice and SMS over Wi-Fi. Our ePDG authenticates subscribers by SIM with EAP-AKA, consistent with 3GPP standards, and supports IPsec/IKEv2 with a dedicated tunnel per PDN session. Our ePDG works with the packet-switched core (EPC/5GC) and the IMS subsystem rather than with base stations. It is meant for areas with no 2G, 3G or LTE coverage at all, for example rural households, remote farms, new neighborhoods and large buildings with weak indoor signal. Our ePDG also supports handover between Wi-Fi and LTE, lets the operator choose whether subscribers connect to specific Wi-Fi hotspots or choose themselves, and supports emergency services. ## What to check in a lab before launch The starting set of checks was derived from the steps of the call path; it is a starting point, not a requirement of the standard. 1. Name resolution. From a Wi-Fi network outside the operator, resolve the ePDG name built from the home MCC and MNC. Check that the answer has the same IP version as the phone's local address. 2. Authentication, positive and negative. Run the IKEv2 tunnel setup with a test SIM and EAP-AKA. Then trigger a rejection and watch it. If the ePDG of the home network rejects the tunnel in IKE_AUTH with a cause such as USER_UNKNOWN or AUTHORIZATION_REJECTED, the phone closes the IKEv2 state. It does not retry an ePDG of the same PLMN until it is switched off or the USIM is removed. 3. Core attach. Confirm that the gateway is selected as configured (DNS-based for initial attach, AAA-provided PGW identity on handover), and that the phone gets its address in the CFG_REPLY. Then check whether the P-CSCF addresses arrive in the same response. 4. IMS registration. Watch the REGISTER, the 401 response and the IMS AKA step. Per GSMA IR.51, the IMS well-known APN gets its own tunnel; per TS 24.229, check that this tunnel stays up at least until deregistration. ## Sources * 3GPP TS 23.402, TS 23.003, TS 23.228, TS 23.167, TS 24.302, TS 24.229, TS 29.273, TS 33.402, TS 33.203 * IETF RFC 7296, RFC 4072 * GSMA IR.51, IR.92 * Apple Support, Make a call with Wi-Fi Calling: support.apple.com/108066 * arXiv 2403.11759: arxiv.org/abs/2403.11759 * VAS Experts, Stingray ePDG: vasexperts.com/products/epdg/ * VAS Experts blog, TWAG and ePDG in one solution: vasexperts.com/blog/mobile-…
dev.to
November 20, 2026 at 12:45 PM
Cutting through the clouds between Gdańsk and Warsaw in the cool Microsoft Curtiss C-46! #msfs2024 #msfs #flightsim

youtu.be/PKFwc2kmPsQ
Warsaw Wonder - MSFS 2024 (4K) - EPDG - EPWA
YouTube video by PenguinOrMonkey
youtu.be
November 9, 2026 at 3:17 PM
Trusted Wi-Fi in an Operator Core: What a TWAN Contains and How It Reaches the PGW over S2a
A phone joins an operator's Wi-Fi and, in the modes that allow it, keeps its IP address when it moves between LTE and Wi-Fi. The 3GPP specifications describe two main ways to build that. One sends the phone through an IPsec tunnel to an ePDG (evolved Packet Data Gateway). The other treats the Wi-Fi network as a trusted access and connects it to the core directly. The second way is the trusted WLAN access network, or TWAN. A TWAN (Trusted WLAN Access Network) is a Wi-Fi access network that the operator uses as a trusted non-3GPP access to the EPC (Evolved Packet Core). The 3GPP functional model gives it three parts. The access points come first. A Trusted WLAN AAA Proxy (TWAP) talks to the authentication, authorization and accounting (AAA) server over STa. A Trusted WLAN Access Gateway (TWAG) talks to the packet data network (PDN) gateway (PGW) over S2a. The rest of this post goes through those parts, the interfaces around them, the order of events when a phone attaches, and how the roles split with the ePDG. ## Trusted is the operator's decision TS 23.402 says that whether a non-3GPP IP access network is used as trusted or untrusted is not a characteristic of the access network. In the non-roaming case the home operator decides, and when the subscriber roams, the home AAA server makes the final call. The phone learns the result in one of two ways: during SIM-based access authentication, or from a policy configured on the phone itself. One network cannot be trusted for one PDN and untrusted for another. The same trust relationship applies to every PDN the phone reaches through it. So "trusted Wi-Fi" below means Wi-Fi that the operator uses as a trusted non-3GPP access. It then connects to the EPC over STa and S2a. ## What is inside a TWAN The specifications assume three functions and leave the split to the implementation. They can sit in one box or in several. Function | Terminates | What it does ---|---|--- WLAN access network | SWw, towards the phone | The access points. The radio layers are IEEE 802.11 and out of 3GPP scope TWAP (Trusted WLAN AAA Proxy) | STa, towards the 3GPP AAA server or proxy | Relays AAA messages, binds the subscriber's International Mobile Subscriber Identity (IMSI) to the phone's MAC address, reports layer-2 attach and detach events to the TWAG, hands the TWAG the subscription data TWAG (Trusted WLAN Access Gateway) | S2a, towards the PGW | Forwards packets between the point-to-point link to the phone and the S2a tunnel of that phone, matched by the phone's MAC address (in Multi-Connection mode, by a separate TWAG MAC address per PDN connection) The AAA side and the tunnel side are two separate jobs with two separate functions. The TWAP faces the AAA server, the TWAG faces the PGW. The authentication itself runs between the phone and the AAA server, which is the EAP server, and the authenticator sits in the TWAN. ## Interfaces around the TWAN Interface | Between | Protocol | What it carries ---|---|---|--- SWw | Phone and WLAN access network | IEEE 802.11 with Extensible Authentication Protocol (EAP) and EAP-AKA' | Access, SIM-based authentication; WLAN Control Protocol (WLCP) in Multi-Connection mode, explained below STa | TWAP and 3GPP AAA server or proxy | Diameter | Access authentication, authorization, mobility parameters, charging-related information S2a | TWAG and PGW | GPRS Tunnelling Protocol (GTP) based or Proxy Mobile IPv6 (PMIPv6) based, chosen by the TWAN | Tunnel for the user plane and its control S6b | PGW and 3GPP AAA server or proxy | Diameter | The PGW reports its identity and the Access Point Name (APN) of the session Gx | PGW and Policy and Charging Rules Function (PCRF) | Diameter | Policy and Charging Control (PCC) rules and event triggers for the session With the GTP variant, S2a control signalling is GTP-C (TS 29.274) and user data goes in GTP-U (TS 29.281), both over UDP. ## How a phone gets in This is the recommended attach for GTP-based S2a in Single-Connection mode. The standard describes it in TS 23.402. 1. The phone associates with an access point and starts EAP authentication with EAP-AKA'. The TWAN passes the EAP messages to the AAA server and tells it which connection modes it supports. 2. The AAA server runs the SIM-based authentication as EAP server and returns the subscription data, including the allowed APNs. The TWAP then sends the TWAG a layer-2 attach trigger with the phone's MAC address and IMSI. The EAP success message to the phone is held back. 3. The TWAN picks the S2a variant (GTP in this walk-through) and the PGW for the APN. 4. The TWAN sends a Create Session Request to the PGW. 5. The PGW opens an IP Connectivity Access Network (IP-CAN) session with the PCRF over Gx and receives PCC rules and event triggers. 6. The PGW tells the AAA server its identity and the APN over S6b. The AAA server registers it with the Home Subscriber Server (HSS), with one exception covered in the checklist below. 7. The PGW answers with a Create Session Response that carries the IP address allocated to the phone. The GTP tunnel is up. 8. The EAP success message goes to the phone after the S2a tunnel is set up, and the phone's traffic flows through that tunnel. In Multi-Connection mode the attach works differently: PDN connections are set up over WLCP instead. SIM authentication here uses EAP-AKA'. EAP-SIM is not allowed for non-3GPP access in EPS. ## Three modes of operation A TWAN can work in three modes, and the phone and the network agree on one inside the EAP-AKA' exchange. If the AAA server gives no mode information, or the phone asks for none, the TWAN falls back to Transparent Single-Connection mode. Mode | Handover between LTE and the TWAN with IP address kept | Non-default APN | Several PDN connections | WLCP ---|---|---|---|--- Transparent Single-Connection | Not supported | Not supported | Not supported: the phone cannot request an additional PDN | No Single-Connection | Supported | Supported | No: one PDN connection or offload at a time | No Multi-Connection | Supported | Supported | Yes | Yes In Multi-Connection mode the phone and the TWAG exchange WLCP to create and release PDN connections, add bearers, hand connections over from 3GPP access and deliver the IPv4 address. WLCP is protected with Datagram Transport Layer Security (DTLS). The TWAG also hands out a separate MAC address for each PDN connection, so that the phone and the TWAG can tell the point-to-point links apart. A TWAN can also serve a phone without going through the core at all. With NSWO, the offload path the standard defines for flows that skip the EPC, the phone sends chosen IP flows straight out of the WLAN using a local IP address. Nothing is anchored in the PGW and no address is kept when the phone moves. ## Where the IP address comes from The IP address of a phone's PDN connection comes from the PGW. In Single-Connection and Multi-Connection modes it is allocated while the PDN connection is set up. In Transparent Single-Connection mode the TWAN acts as the Dynamic Host Configuration Protocol (DHCP) server and hands out the address it received from the PGW. For IPv6 in Single-Connection and Multi-Connection modes, router advertisements come from the PGW with GTP-based S2a and from the TWAG with PMIPv6-based S2a. In Transparent Single-Connection mode the TWAN advertises the prefix it received from the PGW. The PGW is also the user plane anchor for mobility between 3GPP and non-3GPP access. In the modes that allow it, and when the phone asks for it, a session can keep its address when the phone moves between LTE and a TWAN. ## TWAN and ePDG: two entries to the same PGW Both end at the PGW. They differ in what the operator decided about the access network in front of them. | Trusted: TWAN | Untrusted: ePDG ---|---|--- Entry point to the core | TWAG | ePDG Phone to core | No IPsec tunnel from the phone in the TWAN attach procedures; traffic on the air link may be protected as defined by IEEE 802.11, and the interfaces inside the TWAN must be integrity- and confidentiality-protected | IPsec tunnel from the phone to the ePDG Link to the AAA server | STa, ended by the TWAP | SWm Link to the PGW | S2a | S2b The trust decision and the choice of entry point go together. NSWO is a different thing: it is not an entry to the core. The phone sends chosen flows straight out of the WLAN, and a TWAN can allow it next to EPC access, for example in Multi-Connection mode. ## What to check on your own network * Who decides that a given network is trusted, and does the phone learn it through authentication or from a configured policy? * Which connection modes does the TWAN offer? Handover between LTE and the TWAN with the address kept needs Single-Connection or Multi-Connection mode. * Which S2a variant does the TWAN use, and does the PGW accept it on the address the TWAN selects? * In Transparent Single-Connection mode, does the TWAN default APN differ from every APN the phone uses on LTE? The standard recommends that it does. * If both sides do use one APN, what does the AAA server write to the HSS after a TWAN attach? The HSS should not be updated with the PGW identity selected for trusted WLAN, so it does not overwrite the one registered from LTE. * Suppose both connections to that APN are active at the same time and the two sides pick different PGWs. The APN aggregate maximum bit rate (APN-AMBR) is then enforced in each, and the phone gets double the bandwidth for that APN. Is that intended? * When subscribers roam, does the TWAN have STa to the phone's registered or home network? Roaming without it is not supported in Release 19. We build Stingray PGW and Stingray ePDG at VAS Experts. Our PGW has an S2a interface for connecting trusted Wi-Fi networks (TWAN) and S6b for integration with the authentication systems for non-3GPP subscribers. Our ePDG brings in untrusted Wi-Fi. Product details: vasexperts.com/products/pgw. Specifications used: 3GPP TS 23.402 (V19.0.0), TS 29.273 (V19.2.0), TS 33.402 (V19.0.0); TS 29.274, TS 29.281 and TS 24.244 as referenced from TS 23.402.
dev.to
November 11, 2026 at 12:40 PM
Post vom Bund: 45 Tage Zeit – oder deine Diagnosen landen automatisch im zentralen E-GD-Topf!

Ein unverschlüsselter Honeypot für Hacker statt Zero-Trust. Kassenlobby opfert deine Privatsphäre.

Stoppt das: https://glitch27.wtf
#EGD #EPDG #GLITCH
October 5, 2026 at 4:06 PM
45 Tage Frist – oder deine intimsten Diagnosen landen automatisch im zentralen Bundesspeicher!

Beim E-GD plant Bern einen unverschlüsselten Honeypot statt Zero-Trust. Kassen-Lobby opfert Privatsphäre.

Stoppt das: https://act.campax.org/petitions/e-gd
#EGD #EPDG #GLITCH
October 5, 2026 at 6:00 AM
#TuneTuesday wants songs about space

Outer soace is cool. There is an Idol group from there

#NowPlaying #Music
💿 The IDOL From Outer Space
▶ http://youtu.be/OBxWqP-epDg
🎵 https://song.link/y/OBxWqP-epDg
⚙️ https://shorturl.at/3QvaG
The IDOL From Outer Space
Provided to YouTube by TuneCore Japan The IDOL From Outer Space · MELON BATAKE A GO GO SICKxIDOLSxSICK ℗ 2018 GOLLIPOP RECORD Released on: 2018-06-27 Auto-generated by YouTube.
youtu.be
May 6, 2025 at 11:19 AM
#tunetuesday wants songs about space

Outer soace is cool. There is an Idol group from there

#nowplaying #music
💿 The IDOL From Outer Space
▶ https://www.youtube.com/watch?v=OBxWqP-epDg
🎵 https://song.link/y/OBxWqP-epDg
⚙️ https://shorturl.at/3QvaG
The IDOL From Outer Space by MELON BATAKE A GO GO
Listen now on your favorite streaming service. Powered by Songlink/Odesli, an on-demand, customizable smart link service to help you share songs, albums, podcasts and more.
song.link
May 6, 2025 at 11:19 AM
Hey dj-Dictator Those codes Was send to Me #EndOfStory

c9k6-xe4x

c3nt-eb5p

cdat-uwn2

p49y-jx5h

rc2n-6p25

7xff-wt89

v4ax-c27z

6pfj-xcq6

z7wr-ecgy

z5ha-3w2f

z8eb-hxwm

3z7l-epdg

5y54-urw3

8k6j-elhs

2ny7-3epd

#HozSeca #Bandcamp #freealbumcodes #bandcampcodes #Ambient #musicSky
January 8, 2026 at 6:55 PM
Does the color of the bra you wear on a date represent whether you are open to intimate relations? …

www.facebook.com/share/p/epdg...

... #somethingtothinkon #datingtips #datinglife #datingmemes
January 25, 2024 at 8:34 PM
osmo-epdg: The osmocom ePDG for VoWiFi has been released on media.ccc.de https://media.ccc.de/v/osmodevcon2024-179-osmo-epdg-the-osmocom-epdg-for-vowifi
June 1, 2024 at 8:22 PM
osmo-epdg: The osmocom ePDG for VoWiFi has been released on media.ccc.de https://media.ccc.de/v/osmodevcon2024-179-osmo-epdg-the-osmocom-epdg-for-vowifi
May 29, 2024 at 11:52 PM
Cawl Sted - Sophisticated Elevation (2013)
www.youtube.com/watch?v=EpdG...
Cawl Sted - Sophisticated Elevation [ OFFICIAL VIDEO]
YouTube video by Cawl Sted
www.youtube.com
December 19, 2024 at 9:08 PM
I'd hoped to use a Twilio SIM but it looks like they have no ePDG, epdg.epc.mnc026.mcc310.pub.3gppnetwork.org does not resolve. The IMSI from my Twilio SIM card is 31026XXXXXXXXXX.

Not too surprising, they want you to use their APIs not VoWifi.
epdg.epc.mnc026.mcc310.pub.3gppnetwork.org
May 14, 2025 at 10:39 PM
Ok, so now I just have to find a wireless carrier whose VoWifi ePDG either has no allowlist of allowed clients or allows non-Android Linux clients.

Simple. Sure thing.
May 14, 2025 at 10:39 PM
Quality Engineering Professionals

Job title: Quality Engineering Professionals Company: Ciel HR Job description: IN OSS IoT Signalling protocols - DIAMETER, ISUP, MAP etc. MME, SGSN, HSS, DNS, AAA, Epdg, PCRF, PCC, PCG, Gx, Gy, Offline... and Cloud Computing Use of Automation/Automated testing Why…
Quality Engineering Professionals
Job title: Quality Engineering Professionals Company: Ciel HR Job description: IN OSS IoT Signalling protocols - DIAMETER, ISUP, MAP etc. MME, SGSN, HSS, DNS, AAA, Epdg, PCRF, PCC, PCG, Gx, Gy, Offline... and Cloud Computing Use of Automation/Automated testing Why this job matters The QA Engineering Specialist independently... Expected salary: Location: Chennai, Tamil Nadu Job date: Mon, 07 Apr 2025 22:50:14 GMT Apply for the job now!
findsuperdeals.shop
May 9, 2025 at 10:33 PM
Seeing what it takes for #vowifi to work, all the different things the phone talks to, IPsec to EPDG, IPsec to P-CSCF, AKA auth everywhere, SIP for call establishment and sending SMS messages. There's so many moving parts in modern mobile network! Big respect to those who understand how that all […]
Original post on mastodon.social
mastodon.social
December 12, 2025 at 11:36 PM
With the shutdown of #3g and most of #2g in #sweden, I lost the ability to make phone calls on my roaming SIM card altogether. Not that I do it much, very rarely in fact, but would be cool to be able to do it.

My carrier seems to have an ePDG, so #vowifi could be an option. And then I found out […]
Original post on mastodon.social
mastodon.social
December 6, 2025 at 12:01 AM
Corte nacional de voz en Digi: llamadas y SMS caídos casi 2 horas (11:00–13:00); posible fallo IMS/ePDG afectando VoLTE/5G. #Digi #Telecom
Digi sufre una caída nacional que bloquea las llamadas de voz de fijo y móvil
aidoo.news
April 8, 2026 at 12:07 PM
Can’t go wrong with an EPDG HOFer. The only two EPDG’s I’ve got, ironically are also HOFers. Great pickups!
September 11, 2025 at 1:57 AM
After a small shipping mixup, my long overdue T206 Mailday of a couple Tigers HOFers has finally arrived. These are also my first two EPDG backs. With Crawford and Jennings, the Non-Cobb portion of the Tigers T206 set is complete. 3 Cobb’s remain. #vintage #cardSky #setbuilder
December 16, 2024 at 9:56 PM