D7 AU - Infected Luis (6/11)
Serennedy Week final day!
I’ve been slowly preparing since August, and I had so much fun with it. Thank you so much to the best host Kerf!
I’ll be very happy if you enjoyed all of these too!
#serennedy #serennedyseptember2026
Serennedy Week final day!
I’ve been slowly preparing since August, and I had so much fun with it. Thank you so much to the best host Kerf!
I’ll be very happy if you enjoyed all of these too!
#serennedy #serennedyseptember2026
September 25, 2026 at 4:02 PM
D7 AU - Infected Luis (6/11)
Serennedy Week final day!
I’ve been slowly preparing since August, and I had so much fun with it. Thank you so much to the best host Kerf!
I’ll be very happy if you enjoyed all of these too!
#serennedy #serennedyseptember2026
Serennedy Week final day!
I’ve been slowly preparing since August, and I had so much fun with it. Thank you so much to the best host Kerf!
I’ll be very happy if you enjoyed all of these too!
#serennedy #serennedyseptember2026
"Board Cut & Kerf"
Made a small tool for calculating wood cuts while factoring in blade thickness.
Shows leftover offcuts so you do not waste material.
Built it because doing the math in my head during DIY got annoying.
https://yosuke4061.com/online-free-software/board-cut-kerf/
Made a small tool for calculating wood cuts while factoring in blade thickness.
Shows leftover offcuts so you do not waste material.
Built it because doing the math in my head during DIY got annoying.
https://yosuke4061.com/online-free-software/board-cut-kerf/
Board Cut & Kerf
Shows leftover offcuts so you do not waste material.
yosuke4061.com
September 24, 2026 at 10:01 PM
"Board Cut & Kerf"
Made a small tool for calculating wood cuts while factoring in blade thickness.
Shows leftover offcuts so you do not waste material.
Built it because doing the math in my head during DIY got annoying.
https://yosuke4061.com/online-free-software/board-cut-kerf/
Made a small tool for calculating wood cuts while factoring in blade thickness.
Shows leftover offcuts so you do not waste material.
Built it because doing the math in my head during DIY got annoying.
https://yosuke4061.com/online-free-software/board-cut-kerf/
のこぎりの刃の厚み分を引いて、板から何枚取れるか計算するツールを作った。
端材がどれくらい残るかも一目でわかるようにしてある。
DIYのときに頭の中で考えるのが面倒だったからさ。
https://yosuke4061.com/online-free-software/board-cut-kerf/
端材がどれくらい残るかも一目でわかるようにしてある。
DIYのときに頭の中で考えるのが面倒だったからさ。
https://yosuke4061.com/online-free-software/board-cut-kerf/
Board Cut & Kerf
端材がどれくらい残るかも一目でわかるようにしてある。
yosuke4061.com
September 24, 2026 at 10:01 PM
のこぎりの刃の厚み分を引いて、板から何枚取れるか計算するツールを作った。
端材がどれくらい残るかも一目でわかるようにしてある。
DIYのときに頭の中で考えるのが面倒だったからさ。
https://yosuke4061.com/online-free-software/board-cut-kerf/
端材がどれくらい残るかも一目でわかるようにしてある。
DIYのときに頭の中で考えるのが面倒だったからさ。
https://yosuke4061.com/online-free-software/board-cut-kerf/
"Lumber Cut Fit"
Got tired of doing math for woodworking cuts, so I coded a quick browser tool.
It accounts for saw kerf and scrap length automatically. Free to use if it helps your DIY projects.
https://yosuke4061.com/online-free-software/lumber-cut-fit/
Got tired of doing math for woodworking cuts, so I coded a quick browser tool.
It accounts for saw kerf and scrap length automatically. Free to use if it helps your DIY projects.
https://yosuke4061.com/online-free-software/lumber-cut-fit/
Lumber Cut Fit
It accounts for saw kerf and scrap length automatically. Free to use if it helps your DIY projects.
yosuke4061.com
September 20, 2026 at 4:01 PM
"Lumber Cut Fit"
Got tired of doing math for woodworking cuts, so I coded a quick browser tool.
It accounts for saw kerf and scrap length automatically. Free to use if it helps your DIY projects.
https://yosuke4061.com/online-free-software/lumber-cut-fit/
Got tired of doing math for woodworking cuts, so I coded a quick browser tool.
It accounts for saw kerf and scrap length automatically. Free to use if it helps your DIY projects.
https://yosuke4061.com/online-free-software/lumber-cut-fit/
@cascheranno apparently past-me thought ahead and has pre-purchased a couple of these off amazon, so I could make my own, at my own dimensions https://www.amazon.com/dp/B085TCM1GF
Amazon.com: POWERTEC Kerf Mount Corner Bracket 4PK w/Mounting Hardware, Corner Braces for Coffee Table/Desk Legs/Dining Table/Bench Legs (71427) : Industrial & Scientific
Buy POWERTEC Kerf Mount Corner Bracket 4PK w/Mounting Hardware, Corner Braces for Coffee Table/Desk Legs/Dining Table/Bench Legs (71427): Brackets - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
September 18, 2026 at 8:51 PM
@cascheranno apparently past-me thought ahead and has pre-purchased a couple of these off amazon, so I could make my own, at my own dimensions https://www.amazon.com/dp/B085TCM1GF
Blade exposure, feed rate, and coolant flow matter more than brand for most cuts. Thin kerf blades save material on valuable rough. What's your go-to setup for slabbing agate specifically — notoriously tricky with hollow nodules!
September 10, 2026 at 6:20 AM
Blade exposure, feed rate, and coolant flow matter more than brand for most cuts. Thin kerf blades save material on valuable rough. What's your go-to setup for slabbing agate specifically — notoriously tricky with hollow nodules!
The aliens might have sabotaged last stream by hacking my computer, but I ain't gonna stop it anytime soon !
Today we gonna work toward the Kerf-O, explore some locations, clean some more & hopefully get started on decorating the place a bit more.
See you in just a moment my dear Dreamers~💜
Today we gonna work toward the Kerf-O, explore some locations, clean some more & hopefully get started on decorating the place a bit more.
See you in just a moment my dear Dreamers~💜
September 6, 2026 at 12:01 PM
The aliens might have sabotaged last stream by hacking my computer, but I ain't gonna stop it anytime soon !
Today we gonna work toward the Kerf-O, explore some locations, clean some more & hopefully get started on decorating the place a bit more.
See you in just a moment my dear Dreamers~💜
Today we gonna work toward the Kerf-O, explore some locations, clean some more & hopefully get started on decorating the place a bit more.
See you in just a moment my dear Dreamers~💜
For this instrument, the fret slots will need to be at least 0.169”; I added a few thou and raised the specialty (0.023” kerf) blade to sit 0.172” proud of the sled’s surface.
I like using slightly thicker-than-usual fretboards; this one measures 0.325”; typical boards are 0.25” (or thinner).
I like using slightly thicker-than-usual fretboards; this one measures 0.325”; typical boards are 0.25” (or thinner).
September 5, 2026 at 5:19 PM
For this instrument, the fret slots will need to be at least 0.169”; I added a few thou and raised the specialty (0.023” kerf) blade to sit 0.172” proud of the sled’s surface.
I like using slightly thicker-than-usual fretboards; this one measures 0.325”; typical boards are 0.25” (or thinner).
I like using slightly thicker-than-usual fretboards; this one measures 0.325”; typical boards are 0.25” (or thinner).
Dust a Kerf was my stripper name!
September 3, 2026 at 11:14 PM
Dust a Kerf was my stripper name!
with a full set of fannypacks you can put Haunted Kerf in your pocket
September 1, 2026 at 9:58 PM
with a full set of fannypacks you can put Haunted Kerf in your pocket
If I ever get to play DnD I'm naming my character Kerf Sawtooth
August 29, 2026 at 8:31 PM
If I ever get to play DnD I'm naming my character Kerf Sawtooth
Yo check that mega kerf. Not bad for a #woodworking noob.
August 26, 2026 at 6:01 PM
Yo check that mega kerf. Not bad for a #woodworking noob.
The rear (near) tenons will be wedged from the outside, and gently. The front (far) tenons have a kerf and will be wedged more aggressively but still not like a chair leg. #woodworking
August 23, 2026 at 3:11 PM
The rear (near) tenons will be wedged from the outside, and gently. The front (far) tenons have a kerf and will be wedged more aggressively but still not like a chair leg. #woodworking
AI agents can now maximize lumber yield by automatically calculating optimal cutting sequences that account for saw kerf.
August 23, 2026 at 12:26 AM
AI agents can now maximize lumber yield by automatically calculating optimal cutting sequences that account for saw kerf.
GOAL! 12' — B. De Kerf scores for Dender. Dender 1–0 Beerschot VA. Challenger Pro League
#dender #beerschotva
#dender #beerschotva
August 22, 2026 at 2:17 PM
GOAL! 12' — B. De Kerf scores for Dender. Dender 1–0 Beerschot VA. Challenger Pro League
#dender #beerschotva
#dender #beerschotva
KERF: Sawmill Tycoon #Windows が、配信開始されました。852円(8/28(金)2:00まで)。
store.steampowered.com/app/50...
store.steampowered.com/app/50...
Steam：KERF: Sawmill Tycoon
自分の手で木を伐り、丸太を板に挽き、薪を割り、家具を作って客に売る。一人称視点の製材所経営シム。注文を受け、人を雇い、森を植え直し、小さな作業場を材木の帝国に育てよう。
store.steampowered.com
August 20, 2026 at 10:58 PM
KERF: Sawmill Tycoon #Windows が、配信開始されました。852円(8/28(金)2:00まで)。
store.steampowered.com/app/50...
store.steampowered.com/app/50...
KERF: Sawmill Tycoon
https://store.steampowered.com/app/5010520/
7,09€
Fell trees with your own hands, saw logs into planks, chop firewood, craft furniture and sell it all to your customers. A first-person sawmill tycoon where you do the work yourself: take on commissions, hire a crew,...
https://store.steampowered.com/app/5010520/
7,09€
Fell trees with your own hands, saw logs into planks, chop firewood, craft furniture and sell it all to your customers. A first-person sawmill tycoon where you do the work yourself: take on commissions, hire a crew,...
August 20, 2026 at 8:30 AM
KERF: Sawmill Tycoon
https://store.steampowered.com/app/5010520/
7,09€
Fell trees with your own hands, saw logs into planks, chop firewood, craft furniture and sell it all to your customers. A first-person sawmill tycoon where you do the work yourself: take on commissions, hire a crew,...
https://store.steampowered.com/app/5010520/
7,09€
Fell trees with your own hands, saw logs into planks, chop firewood, craft furniture and sell it all to your customers. A first-person sawmill tycoon where you do the work yourself: take on commissions, hire a crew,...
KERF: Sawmill Tycoon
https://store.steampowered.com/app/5010520/
https://store.steampowered.com/app/5010520/
August 20, 2026 at 8:13 AM
KERF: Sawmill Tycoon
https://store.steampowered.com/app/5010520/
https://store.steampowered.com/app/5010520/
KERF: Sawmill Tycoon #Windows が、明日4:00配信に決まりました。
store.steampowered.com/app/50...
store.steampowered.com/app/50...
Steam：KERF: Sawmill Tycoon
自分の手で木を伐り、丸太を板に挽き、薪を割り、家具を作って客に売る。一人称視点の製材所経営シム。注文を受け、人を雇い、森を植え直し、小さな作業場を材木の帝国に育てよう。
store.steampowered.com
August 20, 2026 at 3:31 AM
KERF: Sawmill Tycoon #Windows が、明日4:00配信に決まりました。
store.steampowered.com/app/50...
store.steampowered.com/app/50...
Investeerder Icelake wordt hoofdaandeelhouder van douanemakelaar DKM
Investeerder Icelake wordt hoofdaandeelhouder van douanemakelaar DKM
Het investeringsfonds Icelake wordt de nieuwe meerderheidsaandeelhouder van de specialist in douaneformaliteiten DKM Customs. De bestaande aandeelhouders - de oprichter en CEO Luc De Kerf en de Latemse investeringsmaatschappij Tilleghem - herinvesteren mee in de nieuwe constructie.
www.tijd.be
August 13, 2026 at 3:04 AM
Investeerder Icelake wordt hoofdaandeelhouder van douanemakelaar DKM
Investeerder Icelake wordt hoofdaandeelhouder van douanemakelaar DKM
Het investeringsfonds Icelake wordt de nieuwe meerderheidsaandeelhouder van de specialist in douaneformaliteiten DKM Customs. De bestaande aandeelhouders - de oprichter en CEO Luc De Kerf en de Latemse...
Het investeringsfonds Icelake wordt de nieuwe meerderheidsaandeelhouder van de specialist in douaneformaliteiten DKM Customs. De bestaande aandeelhouders - de oprichter en CEO Luc De Kerf en de Latemse...
Investeerder Icelake wordt hoofdaandeelhouder van douanemakelaar DKM
Het investeringsfonds Icelake wordt de nieuwe meerderheidsaandeelhouder van de specialist in douaneformaliteiten DKM Customs. De bestaande aandeelhouders - de oprichter en CEO Luc De Kerf en de Latems...
www.tijd.be
August 13, 2026 at 3:16 AM
Investeerder Icelake wordt hoofdaandeelhouder van douanemakelaar DKM
Het investeringsfonds Icelake wordt de nieuwe meerderheidsaandeelhouder van de specialist in douaneformaliteiten DKM Customs. De bestaande aandeelhouders - de oprichter en CEO Luc De Kerf en de Latemse...
Het investeringsfonds Icelake wordt de nieuwe meerderheidsaandeelhouder van de specialist in douaneformaliteiten DKM Customs. De bestaande aandeelhouders - de oprichter en CEO Luc De Kerf en de Latemse...
