#MHQuantum
I’ve been making a #tinyRobotArmy lately, here are the latest additions. Once again using @MatterHackers #MHQuantum filament
November 21, 2024 at 7:18 PM
@MatterHackers #MHQuantum in yellow/blue, @martin_hawkes_1 #LumpyBumpyVase of course. I just had to get a rotating display to properly show just how amazing this stuff is.

#3DPrinting #Ender3V2 @DGaylord3D
November 21, 2024 at 7:18 PM
@MatterHackers #MHQuantum in yellow/pink, @martin_hawkes_1 #LumpyBumpyVase as usual 😂.

#3DPrinting #Ender3V2 @DGaylord3D
November 21, 2024 at 7:18 PM
And @martin_hawkes_1 #LumpyBumpyVase isn’t ONLY awesome in @MatterHackers #MHQuantum , but also makes @Proto_pasta #Nebula #HTPLA shine 😍
November 21, 2024 at 7:13 PM
Another of @martin_hawkes_1 designs, the Flame Vase in @MatterHackers #MHQuantum blue raspberry. I just want to print all the shiny things all the time.

@DGaylord3D
November 21, 2024 at 7:13 PM
This one is the sharp vase by @martin_hawkes_1 in #MHQuantum blue raspberry

@MatterHackers @DGaylord3D
November 21, 2024 at 7:12 PM
This was one of my first prints with @MatterHackers #MHQuantum - “elliptical vase”

The shape isn’t terribly practical but it is so pleasing to the eye and touch. Designer said not printable in PLA. Challenge accepted! .8mm nozzle, low layer height, no problem.

@DGaylord3D
November 21, 2024 at 7:07 PM
Yet another #FlameVase by @martin_hawkes_1 in @MatterHackers #MHQuantum, purple/silver

Y’all getting sick of these yet? 😂

#3Dprinting #Ender3V2 @DGaylord3D
November 21, 2024 at 7:07 PM
November 21, 2024 at 7:00 PM
Ned to work on my settings a bit, she’s a bit rough. But still adorable #BabyRoseDragon by @cinderwing3 printed in @MatterHackers #MHQuantum in pink/yellow
November 21, 2024 at 6:54 PM
Something went awry with this one at the top 🤔

#CeresVase by @Clockspring3D in @MatterHackers #MHQuantum in silver raspberry
November 21, 2024 at 6:41 PM
Back to the drawing board. @MatterHackers #MHQuantum REALLY does not like being retracted a lot. 🙀 #3DPrintFail
November 21, 2024 at 6:05 PM
I continued my quest for good print settings by repeating using @PrusaSIicer instead of @Ultimaker #Cura - 1st attempt wasn’t pretty, but with some advice from @cinderwing3 discord, I got GREAT results. Have a #BabyRoseDragon going now in @MatterHackers #MHQuantum yellow/blue.
November 21, 2024 at 6:00 PM
Gave my #3DPrinter a retraction stress test. First try, chewed through the filament. Tweaked settings, and got great result, considering size and layer height. Printed both at the same time to push it. @MatterHackers #MHQuantum #YellowBlue @cinderwing3 #DragonHeads
November 21, 2024 at 5:54 PM
Another #SpiralVaseRose by @lyttamaker in @MatterHackers #MHQuantum yellow/pink - no twists this time! 💖💛
November 21, 2024 at 5:36 PM
And now a 5cm version of the #SpiralVaseRose by @lyttamaker in @MatterHackers #MHQuantum yellow/pink, with stem printed in @Polymaker_3D #PolyLiteSilk in lime.
November 21, 2024 at 5:36 PM
This is another #McGybeer #ArticulatedDragon this time in @MatterHackers #MHQuantum silver/purple
November 20, 2024 at 4:43 PM
Now streaming live on @MakerDeck - #Mcgybeer #ArticulatedDragon in @MatterHackers #MHQuantum silver/purple https://www.twitch.tv/makerdeck
MakerDeck - Twitch
3D Printing Community Makers 24/7
www.twitch.tv
November 20, 2024 at 3:59 PM
Now streaming on @MakerDeck - @cinderwing3 #BabyRoseDragon in @MatterHackers #MHQuantum in pink/yellow on the @BambulabGlobal #BambuX1Carbon https://www.twitch.tv/makerdeck
Twitch
Twitch is the world's leading video platform and communit...
www.twitch.tv
November 20, 2024 at 3:17 PM
This is, by far, the best @MatterHackers #MHQuantum @cinderwing3 #BabyRoseDragon I have ever printed. I had a lot of trouble with it on the Ender, but @BambulabGlobal #X1Carbon printed this flawlessly at 70% in about 3 hours. Too bad camera feed dropped me from @MakerDeck
November 20, 2024 at 3:17 PM
First up, @MatterHackers #MHQuantum dual-color co-extrusion filament.

The yellow is TOTALLY UV reactive! Shown here is pink/yellow and yellow/blue. Haven’t checked the other colors yet.
November 20, 2024 at 2:40 PM
More @cinderwing3D #Roseurtles @MatterHackers #MHQuantum @fulament #MattePurplePLA

Big one is 100%, then one at 65%, two at 55% one at 50% - this one scales down nicely
November 20, 2024 at 1:59 PM
Ok, here’s @MatterHackers #MHQuantum - the blue is quite a bit darker. It also appears to need different settings, as there are a couple places where there are some thick strings of filament hanging off. In one place it was due to a support failure
November 19, 2024 at 5:39 PM
#InfiniteTentacle by @hex3d_design printed using @Polymaker_3D new dual colored #BelugaSilkBlueSilver

Next: same file/settings to compare Polymaker’s and @MatterHackers #MHQuantum blue/yellow. I’m really curious to see the similarities and differences. MH printing now 😸
November 19, 2024 at 5:23 PM
All #HeartPixiePots all day! By @3DPrintBunny

These are in @MatterHackers #MHQuantum in silver raspberry and blue raspberry.

Awesome design, easy print, love them!
November 19, 2024 at 5:23 PM