#PEGDA
The selected EPS-PEGDA biomaterial showed mechanical properties similar to breast tissue, maintained cell viability comparable to the PEGDA-only control, and enabled three days of imaging of embedded cancer spheroids.
#Biomaterials #3DCellCulture #TissueEngineering #Biomanufacturing #CancerResearch
November 17, 2026 at 6:27 PM
We combined EPS with polyethylene glycol diacrylate (PEGDA), which alone lacks the biochemical complexity of natural tissues, and evaluated the resulting hydrogels. To identify a suitable hydrogel formulation for 3D cell culture, we assessed their mechanics, swelling, and stability.
#Biomaterials
November 17, 2026 at 6:27 PM
This proof-of-concept investigation highlights the potential of biomanufactured polysaccharides for tissue engineering and in vitro disease modeling.
#Biomaterials #3DCellCulture #TissueEngineering #Biomanufacturing #CancerResearch

Full open access article is available @pubs.acs.org #ACSAMI
Engineering Hydrogels with Polydisperse Yeast Exopolysaccharides and PEGDA for Embedding Cancer Spheroids
AbstractPolysaccharides are often used to mimic physiologically relevant microenvironments for three-dimensional cell cultures (3DCC). However, naturally s
doi.org
November 17, 2026 at 6:27 PM
Lithium anode surface modified by in situ polymerization of oligomers with diacrylate groups

An additive for liquid electrolyte based on polyethylene glycol diacrylate ( #PEGDA) has been developed.

doi.org/10.71267/men...
November 17, 2026 at 10:39 PM
🔬 Dr. Alina Petrovskaia vom IOM präsentierte beim 5. Women in Science Symposium der FAU ihre Forschung zu funktionalen PEGDA-Hydrogelen mit antibakteriellen Eigenschaften.

Mehr zum Symposium: www.w4w.nat.fau.eu/wis-2026/

#WomenInScience #IOM #FAU
October 5, 2026 at 1:14 PM
Researchers have developed a custom-formulated semi-interpenetrating network scaffold composed of PEGDA, PVA, and gelatin, designed to mimic periodontal ligament mechanics while offering intrinsic antifouling properties.

🔗 Source: https://pubmed.ncbi.nlm.nih.gov/42813888/
October 2, 2026 at 4:56 AM
This article reports the #Fabrication of Ag@MCS/PEGDA core–shell #Nanoparticle micropatterns using femtosecond laser lithography, highlighting controllable formation mechanisms and applications in sensing, cell studies, and #Antimicrobial materials.
#IJEM #OpenAccess: doi.org/10.1088/2631...
May 6, 2026 at 2:45 PM
An innovative #TissueEngineering approach using visible light-based #3DBioprinting with high-fidelity hybrid GelMA-PEGDA #Bioink & chondrogenically preconditioned MSC spheroids, shows efficient #IVDregeneration & disc height restoration, in vivo.

#OpenAccess: doi.org/10.1088/2631...
December 20, 2025 at 12:30 PM
Nanostructure of PEGDA-PEG hydrogel membranes and how it controls their permeability
https://arxiv.org/pdf/2605.11719
Sixtine de Chateauneuf-Randon, Malak Alaa Eddine, Bruno Bresson, Thomas Salez, Sylvain Prévost, S. Belbekhouche, Théo Merland, Cédric Lorthioir, Clémence Le Coeur, C. Monteux.
https://arxiv.org/abs/2605.11719
arXiv abstract link
arxiv.org
May 13, 2026 at 3:30 AM
2025-02-09 Issue of #engineeredlivingmaterials feed: biomed.news/bims-enlima/...
via @biomednews.bsky.social

This includes articles on protein-based bioplastics, synthetic biology tool kits, a recoded organism with a one-stop codon, and an ultrasound-programmable delivery platform.
February 9, 2025 at 9:16 AM
The authors included RRIDs in their in ACS Omega paper! RRIDs improve reproducibility in scientific research. #STMpublishing #reproducibility #OpenScience
Process Design for Small-Scale Production of PEGDA-NVP Hydrogel Nanoparticle Emulsions for Therapeutic Applications
Read the full paper: Process Design for Small-Scale Production of PEGDA-NVP Hydrogel Nanoparticle Emulsions for Therapeutic Applications
doi.org
August 14, 2026 at 7:00 AM
A paper using RRID:CVCL_C1TR was just published in Scientific Reports see "PEGDA-based HistoBrick for increasing throughput of cryosectioning and immunohistochemistry in organoid and small tissue studies". Thank you for making your methods matter! #accelerateopenscience #methodsmatter
doi.org
January 18, 2025 at 8:01 AM
From our collection 3D and 4D Bioprinting read some of Guest Editor Nasim Annabi's favourite research on guiding vascular infiltration through architected GelMA/PEGDA hydrogels by Omid Veiseh et al.

doi.org/10.1039/D5BM...

Read the whole collection here ⬇️
rsc.li/3D_4D_biopri...

#Bioprinting
December 8, 2025 at 3:26 PM
🚀Revolutionizing #CornealRepair🌟
This study introduces a 3D-printed corneal scaffold using a nanocomposite #hydrogel (GelMA, PEGDA, Laponite, dopamine) that enhances mechanical properties and ROS-scavenging activities.

Read more: www.sciencedirect.com/science/arti...

#MedicalResearch #3DPrinting
3D printing of stiff, tough, and ROS-scavenging nanocomposite hydrogel scaffold for in situ corneal repair
Despite significant advancements in hydrogels in recent years, their application in corneal repair remains limited by several challenges, including un…
www.sciencedirect.com
January 23, 2025 at 12:50 PM
## Enhanced Bio-Printability of Poly(ethylene glycol) Diacrylate (PEGDA) Hydrogels via Surface-Functionalized Graphene Oxide Reinforcement for Cardiac Tissue Engineering

**Abstract:** The limitations of current biocompatible hydrogels in mimicking the mechanical properties and conductivity of…
## Enhanced Bio-Printability of Poly(ethylene glycol) Diacrylate (PEGDA) Hydrogels via Surface-Functionalized Graphene Oxide Reinforcement for Cardiac Tissue Engineering
**Abstract:** The limitations of current biocompatible hydrogels in mimicking the mechanical properties and conductivity of native cardiac tissue hinder the development of effective bio-printed cardiac patches. This research proposes a novel hybrid hydrogel system incorporating surface-functionalized graphene oxide (GO) into poly(ethylene glycol) diacrylate (PEGDA) matrices to enhance bio-printability, mechanical strength, and electrical conductivity. The approach utilizes a unique “hydrogel reinforcement strategy” (HRS), optimizing GO dispersion and interfacial adhesion through a multi-step surface modification process, culminating in a significantly improved bio-printing platform for constructing functional cardiac tissue constructs.
freederia.com
December 19, 2025 at 10:20 PM
## Enhanced Lithium-Ion Conductivity in Li7La3Zr2O12-Based Solid Electrolytes via Gradient-Functionalized Polymer Composites

**Abstract:** This research proposes a novel strategy to enhance lithium-ion conductivity in Li7La3Zr2O12 (LLZO) solid electrolytes, a promising candidate for…
## Enhanced Lithium-Ion Conductivity in Li7La3Zr2O12-Based Solid Electrolytes via Gradient-Functionalized Polymer Composites
**Abstract:** This research proposes a novel strategy to enhance lithium-ion conductivity in Li7La3Zr2O12 (LLZO) solid electrolytes, a promising candidate for all-solid-state batteries. The approach involves creating a gradient-functionalized polymer composite incorporating LLZO nanoparticles within a poly(ethylene glycol) diacrylate (PEGDA) matrix. The functionalization introduces localized surface energy gradients that promote lithium-ion diffusion and mitigate interfacial resistance. We demonstrate a 1.8x increase in ionic conductivity compared to pristine LLZO, with improvements in mechanical robustness and electrochemical stability.
freederia.com
November 28, 2025 at 1:02 PM
## Scalable, AI-Driven Optimization of Poly(ethylene glycol) Dimethacrylate (PEGDA) Hydrogel Mechanical Properties for 3D-Printed Tissue Engineering Scaffolds

**Abstract:** This paper details a novel approach to optimizing the mechanical properties of 3D-printed poly(ethylene glycol)…
## Scalable, AI-Driven Optimization of Poly(ethylene glycol) Dimethacrylate (PEGDA) Hydrogel Mechanical Properties for 3D-Printed Tissue Engineering Scaffolds
**Abstract:** This paper details a novel approach to optimizing the mechanical properties of 3D-printed poly(ethylene glycol) dimethacrylate (PEGDA) hydrogels for tissue engineering applications. We propose a multi-faceted data analysis pipeline incorporating a distributed, parallelized processing architecture and a reinforcement learning (RL) agent to rapidly explore a parameter space of crucial formulation variables (initiator concentration, crosslinking agent ratio, and reaction temperature) impacting hydrogel stiffness and degradation rate.
freederia.com
November 25, 2025 at 12:47 PM
In this #EHUikerketa five hydrophobic eutectic solvents based on menthol and thymol were prepared and incorporated into a poly(ethylene glycol) diacrylate (PEGDA) network to form eutectogel membranes. 

Hydrophobic Eutectogels for the Removal of Contaminants of Emerging Concern from Water
Hydrophobic eutectogels composed of menthol and thymol exhibited interesting sorption capacities, efficiently removing pollutants such as bisphenol A, diclofenac and dichlorphenol. These findings hig...
chemistry-europe.onlinelibrary.wiley.com
July 12, 2025 at 9:05 PM
✅Una recerca de la #URV proposa una alternativa més segura per encapsular productes, com ara detergents, que substitueix els compostos tòxics utilitzats per la indústria.

👉 diaridigital.urv.cat/microcapsule...
September 12, 2025 at 8:15 AM
✅Sintetitzen microcàpsules amb plàstics d’origen natural, més respectuoses amb el medi ambient. Una #recercaURV proposa una alternativa més segura per encapsular productes, com ara detergents, que substitueix els compostos tòxics utilitzats per la indústria.
 
👉https://tuit.cat/b8W6v
August 27, 2025 at 8:01 AM
Let's start this account with some science from a fanboy - we try to increase volumetric printing resolution AND improve the cost. We did both and now have some PEGDA resins that cost 2c/print. In revision but hopefully soon to be published!
November 17, 2024 at 5:30 PM
High-resolution low-cost #OpenSource #LCD 3D printing of #microfluidics:

-custom formulated low-viscosity #biocompatible #PEGDA-based #ink
-large build plates
-direct LCD #3Dprinting of open & embedded microchannels

doi.org/10.1101/2023...
#DIYbio #lab #instruments
January 9, 2024 at 5:12 PM
Researchers create 3D-printed living lung tissue

Structural characterization of PEGDA Biotechnology and Bioengineering (2025). DOI: 10.1002/bit.29013 UBC Okanagan researchers have developed a 3D bio-printed model that closely mimics the complexity of natural lung tissue, an innovation that could…
Researchers create 3D-printed living lung tissue
Structural characterization of PEGDA Biotechnology and Bioengineering (2025). DOI: 10.1002/bit.29013 UBC Okanagan researchers have developed a 3D bio-printed model that closely mimics the complexity of natural lung tissue, an innovation that could transform how scientists study lung disease and develop new treatments. Dr. Emmanuel Osei, assistant professor in the Irving K. Barber Faculty of Science, says the model produces tissue that closely resembles the complexity of a human lung, enabling improved testing of respiratory diseases and drug development.
todayheadline.co
July 15, 2025 at 4:17 PM