Context. The Spectrometer/Telescope for Imaging X-Rays (STIX) onboard Solar Orbiter was designed to observe solar flares in the X-ray range of 4-150 keV, providing spectral, temporal and spatial information. Besides 30 imaging detectors, STIX has two additional detectors, the coarse flare locator (CFL) and the background (BKG) detector. Flares observed from Earth are classified using their peak X-ray flux observed by the GOES satellites. Roughly half of all flares observed by STIX are located on the backside of the Sun. These flares lack a GOES-class classification. Aims. In this paper, we describe the calibration of the BKG detector aperture sizes. Using the calibrated measurements of the BKG detector, we explore the relationship between the peak flux for flares jointly observed by STIX and GOES. This allows us to estimate the GOES flare classes of backside flares using STIX measurements. Methods. We looked at the 500 largest flares observed by both STIX and GOES in the time range Feb. 21 to Apr. 23. Aperture size calibration is done by comparing 4-10 keV counts of the BKG detector with the CFL measurements. In a second step, we correlate the calibrated STIX BKG peak flux with the GOES peak flux for individual flares. Results. We calibrated the BKG detector aperture sizes of STIX. Further, we showed that for the larger flares a close power law fit exists between the STIX BKG and GOES peak flux with a Pearson correlation coefficient of 0.97. This correlation provides a GOES proxy with a one sigma uncertainty of 11%. We were able to show that the BKG detector can reliably measure a broad range of GOES flare classes from roughly B5 up to at least X85 (assuming a radial distance of 1AU), making it an interesting detector-concept for future space weather missions. The largest flare observed by STIX to date is an estimated X16.5 $\pm$ 1.8 backside flare on the 20 Mai 2024.

Context. The Spectrometer/Telescope for Imaging X-Rays (STIX) onboard Solar Orbiter was designed to observe solar flares in the X-ray range of 4-150 keV, providing spectral, temporal and spatial information. Besides 30 imaging detectors, STIX has two additional detectors, the coarse flare locator (CFL) and the background (BKG) detector. Flares observed from Earth are classified using their peak X-ray flux observed by the GOES satellites. Roughly half of all flares observed by STIX are located on the backside of the Sun. These flares lack a GOES-class classification. Aims. In this paper, we describe the calibration of the BKG detector aperture sizes. Using the calibrated measurements of the BKG detector, we explore the relationship between the peak flux for flares jointly observed by STIX and GOES. This allows us to estimate the GOES flare classes of backside flares using STIX measurements. Methods. We looked at the 500 largest flares observed by both STIX and GOES in the time range Feb. 21 to Apr. 23. Aperture size calibration is done by comparing 4-10 keV counts of the BKG detector with the CFL measurements. In a second step, we correlate the calibrated STIX BKG peak flux with the GOES peak flux for individual flares. Results. We calibrated the BKG detector aperture sizes of STIX. Further, we showed that for the larger flares a close power law fit exists between the STIX BKG and GOES peak flux with a Pearson correlation coefficient of 0.97. This correlation provides a GOES proxy with a one sigma uncertainty of 11%. We were able to show that the BKG detector can reliably measure a broad range of GOES flare classes from roughly B5 up to at least X85 (assuming a radial distance of 1AU), making it an interesting detector-concept for future space weather missions. The largest flare observed by STIX to date is an estimated X16.5 $\pm$ 1.8 backside flare on the 20 Mai 2024.