#efta01089823
LightNews LightNews
epsteinweb.bsky.social
Parts 1-3/3 — EFTA01089823.jpg
#epsteinweb #efta01089823
https://epsteinweb.org
Available in the iOS app store now!
https://apps.apple.com/us/app/epstein-web/id6758880661
EFTA01089772 | EFTA01089823 the power panel and shat keep the circuit breakers off. The Lessor shall identify each circuit with the breaker number and shall identify the computer hardware to be connected to il. The Lessor shall identify each breaker al the panel and identify the devices that it serves. 4. 8.17 8.18 The Lessor's electrical contractor must connect power poles or base feeds in the junction boxes to the furniture electrical system and test all pre-wired receptacles in the systems furniture. Other Lessor contractors will be installing the cabling in the furniture panels for the terminal and printer locations. Installing the connectors on the terrninagannter ends of the cable, and continuity testing each cable. Work shall be coordinated and performed in conjunction with the furniture, and equipment Installers Contracted by the Government. Much of this work may occur over a weekend on a schedule that requires flexibility and on-call visits. The Lessor must coordinate the application of Certification of Occupancy with furniture installation. ELEVATORS (AUG 2008) A. The Lessor shall provide suitable passenger and. when required by the Government. freight elevator service to any Government-demised area not having ground level access. Service shall be evadable during the hours specified in the 'Normal Hours' paragraph in the SERVICES. UTILITIES AND LEASE ADMINISTRATION section of this SFO. However, one passenger and. when required by the Government. one freight elevator shall be available at all times for Government use. When a freight elevator is required by the Government, shall be accessible to the loading areas. VVhen possible, the Government shall be given 24-hour advance notice if the service is to be interrupted for more than 1-1/2 hours. Normal service interruption shall be scheduled outside of the Government's normal working hours. The Lessor shall also use best efforts to minimize the frequency and duration of unscheduled interruptions. B. CODE" Elevators shall conform to the current requirements of the American Society of Mechanical Engineers ASME A17.1, Safety Code for Elevators and Escalators (current as of the award date of this SFO). Where provided, elevator lobby and elevator machine room smoke detectors shall activate the building fire alarm system, provide Phase 1 automatic recall of the elevator(s), and automatically notify the local fire department or approved central station. The elevator shall be inspected and maintained In accordance with the current edition of the ASME A17.2, Inspectors' Manual for Elevators. Except for the reference to ASME A17.1 in ABAAS Section F105.2.2, all elevators must meet ABAAS requirements for accessibility In Sections 407, 408, and 409 of ABAAS. C. SAFFTY SYSTEMS: Elevators shall be equipped with telephones or other two-way emergency communication systems. The system used shall be marked and shall reach an emergency communication location staffed 24 hours per day, 7 days per week. D. SPEED: The passenger elevators shall have a capacity to transport In 5 minutes 15 percent of the normal population of all upper floors (based on 150 square feet per person). Further, the dispatch interval between elevators during the up-peak demand period shah not exceed 35 seconds. E. INTERIOR FINISHES: Elevator cab walls shall be hardwood, marble, granite. or an equivalent pre-approved by the Contracting Officer. Elevator cab floors shall be marble, granite, terrazzo, or an equivalent pre-approved by the Contracting Officer. LIGHTING: INTERIOR AND PARKING (SEP 2009) A. BUILDING SHELL: 1. In accordance with subparagraph (10) of the, 'Building Shell Requirements' paragraph in the Summary section of this SFO, the Lessor shall provide interior lighting, as part of the building shell cost, as follows: B. a. inferior Lighting. See USCIS Special Requirements. b. Exterior parking areas, vehicle driveways, pedestrian walkways, and building perimeter shall have 5 fool.candles for doorway areas, 3 foot-candles for transition areas (including stairwells), and at least 1 foot-candle overlapping throughout the lot, except where local codes conflict. Illumination shall be designed based on Illuminating Engineenng Society of North America (IESNA) standards. Indoor parking shall have a minmum of 10 foot-candies and shall be designed based on IESNA standards. The intent Is to provide adequate Ighting at entrances/exits. garages, parking lots or other adjacent areas to the building to discourage comes against persons. c. Extenor building lighting must have emergency power backup to provide for safe evacuation of the building in case of natural disaster, power outage, or cnrnInalfferrorst activity. O. The Lessor shall provide occupancy sensors and/or scheduling controls through the building automation system to reduce the hours that the lights are on when the space is unoccupied. The Lessor shall provide daylight dimming controls In atriums or within 15 feet of vendcsys where daylight can contnbute to energy savings. TENANT IMPROVEMENTS: 1. Once the design intent drawings are approved, the Lessor shall design and provide intenor lighting yielding a uniform 50 foot-candles at working surface heght (30' above the floor). The increase between the number of fixtures required in the building shell and the space layout is part of the Tenant Improvement Allowance. The light fixtures shall meet the requirements as stated in the above Building Shell subparagraph A. SFO NO. 9VI2017 12/29/2010 47 INITIAL;ei zL SSOR EA"- EFTA01089823
May 9, 2026 at 3:00 AM