#electrolyzer
whatever [puts you in the electrolyzer to extract valuable powders from you]
November 16, 2026 at 4:11 AM
China Electrolyzer Capacity Analysis and Forecast November 2027 fuelcellsworks.com/2026/11/14/e...
November 18, 2026 at 3:18 PM
China holds nearly 70% of global electrolyzer manufacturing capacity. @heatmap.news & Rinaldo Brutoco detail how nationwide pipelines & regional hubs position China to dominate clean hydrogen infrastructure from electrolyzer dominance to hydrogen distribution:
worldbusiness.org/heatmap-rina...
Heatmap: Rinaldo Brutoco on China’s Growing Hydrogen Industry - World Business Academy
The West Invented the Electrolyzer. China Is Building the Industry. Heatmap | October 28, 2026 China is rapidly expanding its leadership in hydrogen technology, accounting for nearly 70% of global…
worldbusiness.org
November 18, 2026 at 6:32 PM
Green Hydrogen Electrolyzer Market Size, Share & Trends 2035 | WiseGuyReports www.wiseguyreports.com/reports/gree...
Green Hydrogen Electrolyzer Market Size, Share & Trends 2035
Green Hydrogen Electrolyzer Market is Expected to Reach From USD 2.25 Billion To USD 40 Billion by 2035, Growing at a CAGR of 33.4% During 2026 - 2035
www.wiseguyreports.com
November 16, 2026 at 9:16 AM
Electrolyzer Market Trends & Growth Analysis 2035 - Wiseguy | WiseGuyReports www.wiseguyreports.com/reports/elec...
Electrolyzer Market Trends & Growth Analysis 2035 - Wiseguy
Electrolyzer Market is Expected to Grow a Valuation of USD 2.87 Billion by 2035, Reaching at a CAGR of 26.5% During the Forecast Period 2026 - 2035 | Wiseguy Reports
www.wiseguyreports.com
November 16, 2026 at 11:37 AM
Plug GenEco Unveils New Electrolyzer Plant Boosting Green Hydrogen fuelcellsworks.com/2026/11/17/e...
November 17, 2026 at 2:22 PM
Electrolyzer Market Size, Share, Types, Trends, Report 2035 www.marketresearchfuture.com/reports/elec...
www.marketresearchfuture.com
November 16, 2026 at 7:06 AM
Repsol sanctions 150-megawatt electrolyzer installation in Tarragona.

🔗 Read the full story on GazeWire

#Energy #NaturalGas #CrudeOil #GazeWire
Repsol sanctions 150-megawatt electrolyzer installation in Tarragona.
Illustration: Repsol Greenlights 150-Megawatt Tarragona Hydrogen Initiative
gazewire.com
November 15, 2026 at 12:14 PM
This new electrolyzer will have the capacity to produce more than 22 000 tpy of renewable hydrogen, which Repsol will use primarily to manufacture renewable methanol and other products with a low carbon footprint. 🔌💡
decarbonfuse.com/posts/repsol...
decarbonfuse
The initiative represents an investment of approximately €400 million and has been selected to receive up to €104 million in funding as o...
decarbonfuse.com
November 17, 2026 at 2:54 PM
Longdusk's deposit inspector: tap a patch and it tells you how rich it is and every recipe it feeds. This one's rich ice, good for O2, fuel cells and cryosteel.

Free to try. Unlock $6.99 until 30 Nov.
longdusk.space
#ScreenshotSaturday #indiedev
November 14, 2026 at 2:10 PM
Plug Power (#$PLUG ) launched GenEco Scale, an integrated electrolyzer plant offering for hydrogen projects of about 100 MW and up. Arcadia eFuels is the first customer, for its 280 MW Project ARC plant in Texas.
prismmarketview.com/companies/pl...
Plug Power
Plug Power Inc. provides hydrogen fuel cell turnkey solutions for the electric mobility and stationary power markets in North America and Europe. It focuses on
prismmarketview.com
November 17, 2026 at 4:12 PM
A manganese-stabilized ruthenium oxide solid solution for enhanced acidic oxygen evolution in a proton exchange membrane water electrolyzer #OER #Ruthenium #Stability
Northeast Normal University
doi.org/10.1016/j.je...
November 13, 2026 at 6:06 AM
PEM electrolyzers cost twice as much per kW as alkaline systems — yet both use 55 kWh per kg of hydrogen. Why alkaline still wins on cost for most projects:
www.joulepost.com/pem-vs-alkal...
PEM Electrolyzer vs Alkaline Electrolyzer Costs Twice as Much for the Same Hydrogen - Joule Post
PEM electrolyzers cost twice as much per kilowatt as alkaline systems and need new stacks sooner, yet both use 55 kWh per kilogram of hydrogen. Alkaline wins on cost for most projects.
www.joulepost.com
November 13, 2026 at 1:46 AM
Recovered photovoltaic silver can do more than return to the metals market. Its surface can help an electrolyzer keep making a useful chemical.
Solar Scrap Silver Gets a Second Life, Turning CO₂ Into Chemicals
Researchers have turned silver recovered from discarded solar panels into a catalyst that kept converting carbon dioxide for more than 600 hours in a laboratory cell. The study, published in the October 2026 volume of the Journal of CO₂ Utilization, puts a familiar recycling question into a different setting: what useful work can the recovered metal perform next? SilverWars — Silver gets a second working life. Laboratory result; not a commercial recycling plant. Original explanatory diagram based on the linked source; not a source photograph. In this experiment, silver becomes part of an electrode that uses electricity to turn carbon dioxide into carbon monoxide, a chemical feedstock. Its catalytic surface favors the desired reaction while the surrounding electrode brings gas, liquid and electrical charge together. SilverWars — Where the silver works. Conceptual reaction inputs; not an engineering drawing. Original explanatory diagram based on the linked source; not a source photograph. A recovered metal can be chemically pure and still make a poor electrode. Particle structure, support and access to the reaction surface affect how much useful output it can sustain. The new experiment follows the silver beyond extraction and into that working environment. SilverWars — Recovered silver becomes useful through processing and electrode design; CO is a chemical feedstock, not finished fuel. Original SilverWars graphic. ## Recovering the part that carried the current Silver already had a precise job in the panel. The Department of Energy's manufacturing guide describes silver metallization used for electrical contacts on solar cells. These contacts provide a route for the electricity generated in the semiconductor to leave the cell. Recovering the silver preserves a material with useful electrical and chemical properties even when the module around it has reached the end of service. U.S. Department of Energy — DOE anatomy of a solar cell: fingers and busbars form the contacts that collect current. This is a manufacturing reference, not a photograph of the recycled-silver experiment. Getting it back is more involved than removing the aluminum frame. A crystalline-silicon module combines glass, polymer layers, cells, wiring and other components. The polymers that protect the working panel also make it difficult to take apart. The Environmental Protection Agency's recycling overview separates disassembly and glass removal from the later separation and purification of metals inside the cells. Recovering a large share of a panel's weight therefore says little, by itself, about how much silver has been recovered. SilverWars — A solar module is a layered product. Simplified stack; aluminum frame and junction box sit outside it. Not to scale. Original explanatory diagram based on the linked source; not a source photograph. That distinction gives the catalyst experiment its industrial interest. There are two different accomplishments to pursue: separating a useful metal from a complicated waste stream, then giving that metal a demanding second job. A recovery business would need to account for collection, processing and purification before comparing that route with selling recovered silver into an established market. The electrode study adds evidence about the second job; it does not erase the work required to reach it. U.S. Department of Energy — DOE maps the manufacturing stages behind a photovoltaic module. Recovering silver and making a catalyst are subsequent operations; this diagram does not depict the recycling study or demonstrate its economics. ## A second working life for silver The researchers report silver recovered at approximately 99.9% purity and tested in a membrane-electrode assembly with an active area of 10 square centimeters. Their author abstract describes a hierarchical surface structure that helps resist flooding. These are processed catalyst particles, rather than pieces of solar-panel scrap placed directly into a reactor. SilverWars — Purity and working area answer different questions. These figures do not describe a commercial production line. Original explanatory diagram based on the linked source; not a source photograph. Silver matters because it can favor the electrochemical route from CO₂ to CO. Electricity supplies energy to the cell; the catalyst helps determine which chemical product that expenditure produces. A favorable catalyst therefore contributes something more specific than electrical conductivity. It helps put the current to useful chemical work. SilverWars — Conducting current is not the whole job. The catalytic role determines a chemical pathway; electricity supplies energy. Original explanatory diagram based on the linked source; not a source photograph. A separate Helmholtz-Zentrum Berlin research account illustrates how closely that function depends on form. In its study, silver nanoparticles were distributed on carbon, with the best reported combination using particles around 10 nanometers across and a silver content of 20% by weight. Those figures belong to that experiment, not the recycled-silver cell. They show why a catalyst specification includes particle structure and support as well as the name of the metal. SilverWars — Metal, size and support belong together. Separate HZB-reported experiment, not the recovered-silver cell. Original explanatory diagram based on the linked source; not a source photograph. The change in application also changes the desired shape. A contact on a solar cell must collect and conduct charge through a manufactured pattern. In an electrolyzer, accessible catalytic surface is especially important: reactants need to meet the silver where charge transfer can occur. Breaking material into small particles can expose more surface for a given mass, but the particles still need an effective connection to the rest of the electrode. Simply dispersing more silver throughout an inaccessible layer would not make all of it productive. Yuming Wu et al. / ACS, 2024 — Figure 1 from the separate 2024 flooding-control study: catalyst-layer construction and surface characterization. These are not images of the recycled-silver experiment. CC BY 4.0. Successive recovered batches would need to reproduce that working surface. A purity measurement can identify what is in the material; it cannot, by itself, show how the material will behave after it is made into an electrode. SilverWars — Purity is only one specification. A repeat batch needs both material characterization and operating tests. Original explanatory diagram based on the linked source; not a source photograph. ## The reaction needs a way in A gas-fed electrode gives CO₂ a short route toward the catalyst. Its porous structure allows gas to approach a thin reaction region instead of relying entirely on slow transport through a bulk liquid. Silver particles occupy that region, alongside other materials that help hold the layer together and carry charge. SilverWars — Three routes meet at the catalyst. Conceptual gas-diffusion electrode; no dimensions or layer recipe implied. Original explanatory diagram based on the linked source; not a source photograph. The difficulty is keeping the route open. Liquid entering too much of the pore network can obstruct gas access. The silver may still be present, but less CO₂ reaches the places where it can react. Adding more metal would not automatically clear a flooded pathway. SilverWars — A silver catalyst can remain present while flooding obstructs CO₂ access. This schematic explains a general electrode problem, not the geometry of the new experiment. Original SilverWars graphic. This is a well-established design problem beyond the new recycling study. A 2024 investigation of silver gas-diffusion electrodes introduced reduced graphene oxide into the catalyst layer to create water-repelling regions. It sustained a high share of current going toward CO for more than eight hours under its stated conditions, while the comparison electrode deteriorated. That is a different material treatment and test, but it makes the physical point visible: useful silver requires a surface that the reactant can continue to reach. SilverWars — A separate test tackles flooding. 2024 comparison study; not the 600-hour recovered-silver experiment. Original explanatory diagram based on the linked source; not a source photograph. This creates a practical balance inside a very thin structure. The electrode needs paths for gas, ionic transport and electrical current at the same time. Making one part more water-repelling may help gas access, but the complete construction still has to support the electrochemical reaction. The 2024 paper describes catalyst particles, polymer binder and conductive carbon as parts of that working layer. Silver supplies the catalytic function within this assembly; the other materials help keep that function accessible. SilverWars — The catalyst layer shares the work. Simplified functions; the complete layer must retain gas and ionic access. Original explanatory diagram based on the linked source; not a source photograph. The endurance measurements therefore test a coupled problem: the silver must favor CO production, and the porous electrode must keep delivering CO₂ to it. Losing gas access can interrupt useful production without exhausting the metal itself. Yuming Wu et al. / ACS, 2024 — Figure 2 from the separate 2024 study compares CO selectivity and electrolyte seepage. The plotted experiment is not the 600-hour recycled-silver test. CC BY 4.0. ## Read the endurance figures together The recycled catalyst's longest reported run exceeded 600 hours at a current density of 100 milliamperes per square centimeter. A separate run at 200 milliamperes per square centimeter lasted 55 hours with approximately 95% Faradaic efficiency toward CO. The higher-current figure and the longer lifetime cannot be combined into one operating result. SilverWars — Two operating tests, two results. The ≈95% CO Faradaic-efficiency figure belongs to the higher-current test. Original explanatory diagram based on the linked source; not a source photograph. Current density expresses how hard a given electrode area is being driven. At the same area, a higher current sends more charge through the cell each second, creating the possibility of a higher production rate if selectivity and gas supply hold up. Duration answers a different question: how long the device sustains its reported behavior. A small cell running gently for a long time and one running harder for a shorter time provide different evidence for a future production design. SilverWars — Intensity and endurance are different axes. A longer run does not by itself mean a higher production rate. Original explanatory diagram based on the linked source; not a source photograph. The 600-hour result is more than 25 days of laboratory operation. It is a substantial observation of endurance, but a larger electrode would also have to distribute gas, liquid and current across a larger working surface. Conditions that are reasonably uniform in a small cell can become harder to maintain as its dimensions increase. That engineering consequence is why active area belongs beside the lifetime figure, rather than disappearing once the headline number has caught attention. SilverWars — The reported longest-duration run and the higher-current run used different settings. Faradaic efficiency measures charge going toward CO, not whole-process energy efficiency. Original SilverWars graphic. Faradaic efficiency describes the share of electrical charge accounted for by a particular product. It does not say that 95% of all incoming carbon dioxide became CO, or that the complete process converted electricity into product at 95% energy efficiency. A development team needs those distinctions to compare electrodes fairly. SilverWars — Three efficiencies cannot be substituted. A high value for one does not establish the other two. Original explanatory diagram based on the linked source; not a source photograph. Carbon can also take a route that does not produce the intended gas. A separate membrane-electrode study tracked carbon dioxide entering bicarbonate and carbonate chemistry in the electrolyte. Its carbon balance shows why useful product, unconverted feed and carbon entering the liquid need to be distinguished. An electrode can look selective when judged by charge while the wider process still has carbon-management work to do. SilverWars — Track where the carbon goes. Conceptual carbon accounting; arrows do not encode measured proportions. Original explanatory diagram based on the linked source; not a source photograph. Carbon monoxide is useful here as an intermediate for chemical manufacturing, not as a finished product ready to replace every fuel. The equipment downstream must be designed around the composition of the gas actually leaving the cell. Unreacted CO₂ and other products can create separation and recycling duties. Improving the fraction of current that produces CO can help, while a low conversion of the incoming feed can still leave a large gas stream to handle. These measurements describe different parts of the same plant. SilverWars — Useful gas still needs a process around it. Downstream duties depend on the actual outlet composition. Original explanatory diagram based on the linked source; not a source photograph. ## Measuring the second life A useful comparison would put recovered and conventional catalyst material through the same operating conditions and follow their output over time. Purchase price per gram would be only the starting point. Catalyst loading, replacement frequency, electricity consumption and usable product would determine how that material contributes to production. A lower-cost powder that needs frequent replacement could lose its advantage; a durable recovered catalyst could earn value by maintaining the electrode's output for longer. Those are economic consequences to measure, not savings already demonstrated by the abstract. Yuming Wu et al. / ACS, 2024 — Figure 3 from the separate 2024 study compares current density, seepage and catalyst-layer properties. It illustrates why electrode structure belongs in a silver-catalyst assessment. CC BY 4.0. Electricity use, product separation, feed handling and recovery inputs all remain part of the process. The endurance experiment has not established a complete plant's economics or lifecycle carbon balance. Its narrower achievement is valuable: recovered silver maintained a catalytic function over an extended laboratory run. SilverWars — The experiment is part of a larger balance. No full-plant cost or lifecycle-carbon result is established by the endurance test. Original explanatory diagram based on the linked source; not a source photograph. For a developer, the decisive comparison is the usable CO delivered under matched operating conditions, with the energy and carbon flows accounted for. That comparison gives silver's selectivity and the electrode's durability a common purpose. A longer-lived surface could keep more of the recovered metal doing productive work, but only a complete process balance can show what that second life is worth. SilverWars — Compare the useful output over time. Match operating conditions; measure usable CO, energy, carbon and replacement needs. Original explanatory diagram based on the linked source; not a source photograph.
www.silverwars.com
November 18, 2026 at 6:06 PM
Thinking more about this - don't be surprised if China moves to cover the next-gen heat pump/refrigeration market next.

They are currently working on electrolyzers
heatmap.news/energy/china...
November 9, 2026 at 2:05 PM
Explore the US Hydrogen Electrolyzer Market, driven by green hydrogen development, clean energy investments, and growing demand for advanced water electrolysis technologies. Discover key industry trends and opportunities: www.marketresearchfuture.com/reports/us-h...
US Hydrogen Electrolyzer Market Growth Drivers 2035
US Hydrogen Electrolyzer Market to Reach USD 1671.58 Million with CAGR of 25% By 2035, USA Hydrogen Electrolyzer Market Analysis By Product Type, By Capacity, By Outlet Pressure, and By End-user | Uni...
www.marketresearchfuture.com
November 9, 2026 at 9:53 AM
Cobalt-nickel anode runs over 8,000 hours in hydrogen electrolysis tests

Sources:
https://www.nature.com/articles/s41467-026-79537-y

See other stories with deeper dives at https://sharedsapience.com/century-report/?utm_source=bluesky&utm_medium=post&utm_campaign=tcr-newsroom
November 13, 2026 at 8:28 AM
Online now!

An Analysis by Andre Bardow and colleagues highlights opportunities for process-wide energy, cost, and environmental impact savings by employing elevated-temperature electrolysis and to capture waste heat. #ChemSky

www.nature.com/articles/s44... link (open access)
Elevating CO2 electrolyzer temperature accelerates the viability of chemical electrification - Nature Chemical Engineering
Unlocking the full potential of CO2 electroreduction requires looking beyond ambient-temperature operation. By integrating elevated-temperature electrolysis to capture waste heat, this study highlight...
www.nature.com
November 9, 2026 at 7:38 PM
Siemens Energy says this Transition Industries facility will be its largest electrolyzer installation in the Americas.

Transition Industries is a Houston-based developer of world-scale, net-zero carbon methanol and hydrogen projects in North America. #EnergySky
decarbonfuse.com/posts/housto...
decarbonfuse
Transition Industries has signed a definitive EPC agreement with Siemens Energy and Techint E&C for the roughly 210 MW electrolyzer a...
decarbonfuse.com
November 7, 2026 at 2:35 PM