#simplefoc
(1/2) I'm having EMI problems. I have 2 #bldc motors that I'm controlling with #simplefoc using an I2C magnetic encoder, each about 40cm from the driver.

One of the I2C cables is prone to errors when the motor is running. If I swap the wires, the errors switch […]

[Original post on leds.social]
November 17, 2026 at 10:31 PM
small BLDC motors make for excellent knobs actually: hackaday.com/2025/10/09/m...

just from that screenshot the design seems pretty sane actually; looks like RPi for realtime audio DSP & GUI on an OLED display + custom PCB with an ESP32 and the BLDC knob.
Motors Make The Best Knobs With SimpleFOC
The worst thing about a volume knob is that, having connected it to a computer, it might be wrong: if you’ve manually altered the volume settings somewhere else, the knob’s reading won&…
hackaday.com
September 13, 2026 at 9:59 PM
Conception en cours d'une nouvelle carte électronique basé sur une Raspberry Pi Pico :
-> Contrôle de moteur BLDC
-> Utilisation de simpleFOC

#robotique
#électronique
January 7, 2025 at 6:41 AM
March 2, 2026 at 7:34 PM
I made huge progress on my RP2350 motor controller this weekend! This is my 30A 50v brushless and stepper motor controller that will run SimpleFOC, based on a motor controller I designed for my farming robot Acorn. It's not done and needs massive review, but I got it 100% routed with no DRC errors!
July 28, 2025 at 6:57 AM
Yep! SimpleFOC. Which I will definitely work on optimizing a bit at some point, but it works great. This is a continuation of the RP2040 dual brushless motor driver project I have been working on for several years now. I’ve been waiting for the RP2040 successor.

github.com/tlalexander/...
GitHub - tlalexander/rp2040-motor-controller: A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad. - tlalexander/rp2040-motor-controller
github.com
November 16, 2024 at 8:39 PM
github.com/Ben-PH/Simpl...

If a melange of embedded rust and motor control tickles your curiosity, I present:
GitHub - Ben-PH/SimpleFOC-rs: An attempt at re-writing the SimpleFOC library in rust.
An attempt at re-writing the SimpleFOC library in rust. - Ben-PH/SimpleFOC-rs
github.com
December 2, 2024 at 11:52 AM
FOCn is an #ESP32-S3 board for #motorcontrol that works with the SimpleFOC #Arduino library implementing the Field Oriented Control (FOC) algorithm for BLDC and Stepper motors.

cnx-software.com/2024/04/22/foc…
FOCn ESP32-S3-based, medium-power BLDC driver module supports SimpleFOC - CNX Software
European engineer, Matej Planinšek of PLab, has developed the FOCn — a medium-power BLDC driver module based on ESP32-S3 WiSoC capable of delivering up to
www.cnx-software.com
February 6, 2025 at 5:14 AM
Nice! I've been spending the day reading and watching all kinds of BLDC related content. One thing I've been wondering: a lot of theory talks about measuring the current through the 3 phase for field oriented control, but many SimpleFOC demos don't have current measurement. Can you do without?
November 16, 2024 at 8:46 PM
That's for BLDC motors I assume? What kind of SW do you use to drive the motor? SimpleFOC?
November 16, 2024 at 7:46 PM
Discover how the Infineon team built a compact, torque-dense gripper featuring force feedback, Arduino SimpleFOC, and computer vision.
The Ultimate DIY Gripper? - BLDC Motors & Haptic Sensing
Discover how we built a compact, torque-dense gripper featuring force feedback, Arduino SimpleFOC and computer vision. By Infineon Team.
www.hackster.io
June 2, 2025 at 6:45 PM
Feed: "Hackaday"
By: Tyler August on Friday, October 10, 2025
Motors Make the Best Knobs With SimpleFOC
The worst thing about a volume knob is that, having connected it to a computer, it might be wrong: if you’ve manually altered the volume settings somewhere else, the knob’s reading won&…
hackaday.com
October 10, 2025 at 3:11 PM
October 10, 2025 at 12:21 PM
I think this is highly likely if we proceed logically! The other simplefoc boards are already on aliexpress even though they aren't very good and few people buy them!
January 25, 2025 at 7:45 PM
I am strongly tempted to forsake the simplefoc flagship board and switch to this but it's a dual motor board. Why can't we just split it in half? Unit size. It seems like modularity? If you have two motors you use two boards. I really think it would help. More general purpose.
January 25, 2025 at 6:21 PM
Or my favorite, testing a SimpleFOC board for a gimbal motor, running hardware tests that require me to physically move wires, without telling me to move the wires and waiting for me to do it. Then immediately taking the test failure as an excuse to make up a complicated hardware failure scenario.
August 7, 2026 at 10:49 PM
SimpleFOC is one of the examples I've seen with good results. Same for ODrive
January 13, 2026 at 3:47 AM
SimpleFOC forum review then press the button?
January 20, 2026 at 8:19 AM
When you do get to it, is forum.opencyphal.org/t/cyphal-vs-... any use as the CAN implementation? Essentially just get SimpleFOC talking to github.com/107-systems/...
Cyphal vs. DroneCAN
Cyphal has been conceived as an improved successor to a highly successful experimental protocol called UAVCAN v0, also known as DroneCAN. This article briefly outlines the differences between Cyphal a...
forum.opencyphal.org
September 19, 2025 at 9:26 AM
A new AI review! simplefoc/Arduino-FOC ⭐3.9/5.0
SimpleFOC is a widely adopted, actively maintained C++ library that brings Field Oriented Control (FOC) for BLDC and stepper motors to the Arduino/PlatformIO ecosystem across many MCU families (AVR, STM32, ...
https://gitrated.com/simplefoc/Arduino-FOC
April 5, 2026 at 1:25 PM