Now I can fully control my #IC7000 through a 7" touchscreen LCD + Radxa A7Z.

Project update:

-Redesigned GUI
-Added Memory tab for quick frequency recall, Prop, CW/RTTY, and APRS tabs
-Added a CM108 sound card for CW/RTTY decoding and APRS RX/TX
#hamradio #amateurradio

bsky.app/profile/sp2k...

#hamradio #amateurradio

If anyone’s wondering - those two knobs in the top box are there to control the K Index and sunspots levels, because obviously that’s how space weather controller works 😁 #amateurradio #hamradio

I was getting tired of digging through the menus on my #IC7000 just to change settings. So why not build my own control panel?

Time to create a custom GUI interface.

Below #Radxa A7Z SBC connected to the TRX via CI-V, running on a 7-inch touchscreen. #amateurradio #hamradio

Christmas time is over, so I 've removed tiny christmas decoration from #868MHz #meshcore antenna. #amateurradio #hamradio

#hamradio #amateurradio

Planned further code update:
- Touch control,
- WiFi credentials settings,
- Screen brightness settings 0-100%,
- Callsign that will be displayed as screensaver.
- Web server with historical data saved in SDcard.

Any ideas what else can be done with #esp32? #amateurradio bsky.app/profile/did:...

Digi interface project completed. Inside some bits and boobs: USB Hub, USB isolator Adum3160, UART for RX/TX/RTS. Sound card CM108 isolated with audio transformers, ESP32, LCD 2.8inch. Ham weather refreshing every 1 min and pulling data from hamqsl #amateurradio #hamradio

What to build today? #hamradio

Thai King (callsign HS10A) is getting to his car. Look at what he was given #amateurradio #hamradio

This build in OLED in #mmdvm is way to small 😁
#dmr
#hamradio
#amateurradio

Another project almost completed. HF receiver controlled by ESP32. Inside few bits and bobs - SI4735, SI5351, PAM8403, LCD 4" with touch screen. All powered by 2x20650 batteries. #hamradio #amateurradio

Not the perfectly made project but it works. Choke 1:1 on FT240-43 core, UnUn 9:1 on FT140-43 core with 450Ω dummy load. #hamradio #amateurradio

On December 1st, 2024, the #VLF transmitter, with call sign #SAQ at #Grimeton Radio Station is on air - VLF 17.2 kHz CW!
SCHEDULE:
09:00 UTC Doors to the broadcasting hall open.
09:20 UTC Live broadcast on YouTube.
09:30 UTC Start of the generator.
10:00 UTC An announcement is broadcast
#hamradio

Looking for fellow amateur radio guys please repost

Testing QRP DIY Magloop - 1m diameter