#Pylontech
#Pylontech: liderazgo en #almacenamiento residencial y soluciones energéticas para cada escenario

Pues ver sus últimos productos en #Genera2026

#baterías
#renovables

www.energias-renovables.com/almacenamien...
Pylontech: liderazgo en almacenamiento residencial y soluciones energéticas para cada escenario
Pylontech: liderazgo en almacenamiento residencial y soluciones energéticas para cada escenario
www.energias-renovables.com
November 18, 2026 at 3:15 PM
Talking Myself Out Of A New Solar Battery
Our solar battery wasn't a great financial choice: although it yields _some_ savings, the steep upfront cost means that it will probably never break even. Recently, however, I found out that the Pylontech US2000C modules that it's made up of have come down in price quite significantly - I could add `2.4 kWh` of battery capacity for a little under £500. That's about a third of the price of the originals, which _feels_ like an absolute bargain. Such a significant reduction in price would mean that a new module would break even much sooner. After that, any savings that it generated would go towards the amortisation of its more expensive counterparts. So, I sat down and ran some numbers to see if it would make sense. * * * ### Can We Fill The Capacity? The first question to answer was: if we had the capacity, could we actually fill it? There'd not be a lot of point in paying to expand capacity only for it to sit empty. * * * #### Grid Charging The battery is currently1 set to charge at 25 amps. At that rate, it goes from 30%2 to full in about 4 hours: If we added a fourth module, we'd need a third longer: 80 minutes. Our battery is full by 04:00 and peak pricing starts around 06:00, so there'd be time for the charge to complete before the morning peak starts. * * * #### Solar Charging For solar charging, it's largely just a question of whether we export enough energy that we could fill the module instead. That's somewhat more marginal, but is generally achieved over summer: This, incidentally, is the _non financial_ benefit of the battery: whatever break-even looks like, the battery enables us to consume more of the clean, green energy coming from our panels rather than pulling from the, still mainly fossil fuel powered, grid. * * * ### Calculating Break-Even So, we've established that we could fill the battery, whether charging from the grid or the panels. The next questions to answer are: * When would the new module break-even? * How much (if at all) a new module improves break-even of the originals? * * * #### Current Weekly Savings To answer those questions, we need to know what savings the battery currently unlocks. I queried my InfluxDB instance, limiting the data to this year (because savings in prior years were inflated by savings sessions and Powerups): select mean(val) as "mean", median(val) as "median", max(val) as "max", min(val) as "min" FROM (SELECT difference(last("battery_total_generated_savings"))/100 AS "val" FROM Systemstats.rp_720d.solar_amortisation_new WHERE time > '2026-01-01T00:00:00Z' GROUP BY time(1w) ) Mean | Median | Max | Min ---|---|---|--- £4.29 | £4.23 | £7.86 | £0.72 Those savings are achieved with 3 modules, so we can take the median (the range between min and max is large, so median feels safer than mean) and turn that into savings per module: £4.23 / 3 = £1.41 Adding a module _should_ mean increasing the median weekly saving by £1.41, to £5.64. Technically, we also need to account for inflation in energy prices but the future is quite hard to model and we'd need to predict: * The average rate of inflation * The average daily delta between low and high electricity prices The second is essential because the delta is where battery savings come from: if prices dropped, but the gap between charge & discharge prices didn't change, our battery savings would remain _exactly the same_. It makes as much sense to not introduce uncertainty and, instead, to simply not account for either. * * * #### Individual Break-Even There are 2 ways that we can think about break-even: we can roll the cost into the original capital, or we can calculate individual breakeven with subsequent impact of break-even on the original. In _theory_ both figures should come out about the same, so we're going to calculate both as a cross-check to catch mistakes in my maths. So, first, how long would it take a new module to break even? # Cost divided by weekly saving £500 / £1.41 = 354 weeks (6.8 years) Just under 7 years. That's already more than half of the warrantied lifetime, ouch. After that 7 years, the £1.41/week saving would help pay down the original modules. So we need to calculate the impact that that has: # Figure out how much of the original would have # amortised in the leading 7 years (£4.23 * 52) * 7 = £1539.72 # Current capital outstanding, minus 7 years amortisation £4999 - £1539.72 = £3459.28 # Remaining amortisation would be at the combined rate £3459.28 / £5.64 = 613 weeks (11.79 years) So, break even would occur in about 19 years (the initial 7 years, followed by the 11.79). If we consider that the original modules are now 3 years old, that's more than double their warrantied lifetime. * * * #### Amortisation As One Block That wasn't a particularly happy result, but let's see if it's corroborated by rolling everything together £4999 / £4.23 = 1181 weeks (22 years) # Add the capital cost of the new module £4999 + £500 = £5499 # Calculate the breakeven of that at the combined # weekly savings rate £5499 / £5.64 = 975 weeks (18.75 years) Once again, the result is about 19 years from now (or 22 years from the original purchase). * * * #### Break-even conclusion A new module **would** help reduce the break-even period of the original. However, the reduction isn't _nearly_ enough to bring ROI back within the battery's warrantied, or likely, lifetime. Unfortunately, despite the significant reduction in the price of new modules, all that we'd actually be doing is _pissing more money away_. * * * ### It Gets Worse: Time Of Use The calculations above rely on an important assumption: that the new module would be able to yield the same savings as its counterparts. However, that may not be the case: if the existing capacity is already sufficient to see us through peak pricing periods, an additional module would discharge when prices are lower (and therefore achieve lower savings). If we graph the last few days out, we can see that the battery almost always hits minimum charge (the bottom of the blue troughs) after peak prices have passed: Even on the occasions that the battery did run flat a little early, it wasn't so early that there'd be time to discharge another 1/3 of the energy. This is actually a dynamic that I've noted as an issue before: > In the time covered, one of primary determining factors seems to be whether or not we use the oven in the evening: If we instead cook with the airfryer (or a gas hob), we don't draw enough energy at peak time. The battery's charge is then released gradually over the course of the night when prices are lower, leading to negative savings. So, if we did add capacity, it's unlikely that it'd actually increase current savings by 1/3. We'd still save _something_ but the break-even would be more distant, even, than the already gloomy numbers above. * * * ### Change Tariff? A huge part of the reason that the yielded savings are so low is that the energy tariffs we're on are already _extremely_ competitive: * Export: `£0.12/kWh` (down from £0.15 last year) * Import: Weighted average over last year, `£0.21/kWh` Any solar charged into the battery hits an `£0.12/kWh` opportunity cost. The average unit cost being just £0.21 limits our scope for savings to about £0.09. Big spikes at peak do accelerate our savings, but the larger daily spikes tend to be accompanied by higher minimum prices: There **are** other tariffs which offer greater pricing deltas though. For example, Octopus Go currently has the following prices Time | Price ---|--- 00:30 - 05:30 | £0.094 05:30 - 00:30 | £0.347 Compared to not having a battery, each unit charged overnight would yield a saving of £0.253 when discharged in the day. But we **do** have a battery, so assuming that the price delta stayed the same, we'd be saving about `£0.11/kWh` more than we do now. Go's higher pricing period is much longer than on Agile and we'd need enough capacity to run off battery during those times, otherwise things could quickly go south: # Our consumption sits at about 30kWh a day # ~4 kWh is consumed 00:30 - 05:30 # with another 6 charged into the battery # # The remaining 20 would be at full price (10 * £0.094) + (20 * £0.347) = £7.88/day # Current cost at weighted average 30 kWh * £0.21 = £6.30 # £1.58/day worse off. Over a year: £1.58 * 365 = £576.70 So, switching to Go without upgrading capacity would leave us worse off by almost £600/year. Winter configuration sets a minimum charge of 30%, so the usable capacity of each US2000C module is `1.68 kWh`. We'd need 16 modules in total to cover `26 kWh` of usage. We've got 3, so we'd need 13 more. Purchased at the new price, that would be an investment of (`13 * 500`) £6500. Running a lazy break-even calculation against that: # £0.11 saved per kWh, we'd need to charge # (and discharge) £6500 / £0.11 = 59,091 kWh # If we're averaging 26kWh supplied by battery/day 59,091 / 26kWh = 2273 days (6.23 years) Break-even of the upgrade could happen in just over 6 years. Unfortunately, there are important costs that we haven't accounted for: * To fill `26 kWh` in 5 hours we'd need a charge rate of about 6 kW, which means a new inverter, adding ~£1500 to the price * Because of the increased capacity, we'd need a G99 application It would be a big capacity upgrade, so we'd need to pay an installer for all of the above. That would also increase the per-module price: the most recent installed price I've seen from our installer is more like £1000/module. Additional costs pose a _big_ problem for break-even: # Go Daily savings vs now 26 kWh x £0.11 = £2.86/day # Turn it into a year £2.86 * 365 = £1044/year Every additional £1000 of cost pushes breakeven back a year. Adding just a couple of grand takes us uncomfortably close to the warrantied period again. If the installer's price _is_ still double the self-installed price, we're back to break-even being more than the battery's warrantied lifetime: # Modules at installed price # plus inverter (13 * £1000) + £1500 = £14,500 # At £1044/year of savings £14,500 / £1044 = 13.9 years There's another issue, because the calculations above are all sized with _very_ little room for manoeuvre: * Mistakes are _guaranteed_ to cost `£0.34/kWh` (almost four times the desired rate) * If our daily consumption grows, everything not covered by the battery would cost `£0.34/kWh` * The battery's usable capacity reduces as it ages, gradually pushing more of our usage into the `£0.34/kWh` period. There _is_ an upside: the tariff would give a guaranteed margin between low (£0.094) and export unit prices (£0.12), significantly reducing the opportunity cost of charging the battery from solar. Even ignoring that the export price may change in future, the gain wouldn't make much difference during the winter months and so doesn't really change calculations much. So, although Octopus Go offers a higher pricing delta (accelerating ROI), switching to it would either cost us £600/yr or mean paying £14,500 up front and hoping nothing goes wrong. * * * ### The Problem The problem is actually the electricity prices that we're paying: the savings generated by the battery rely on being able to charge at a low price and sell at a higher one. But, odd spikes aside, the range of prices on Agile is fairly compressed. Switching to Go widens that gap and so made the original calculations look better. But a swtich would also extend peak pricing from ~4 hours a day to 19 and we'd need to invest in significant capacity increases to avoid paying `£0.34/kWh`. We'd essentially be spending 15 grand to insulate ourselves from the consequences of our own decision. So, on paper, the battery looks like a bad investment but that's because the prices that it avoids are still comparatively low. Unfortunately, it's not just me: Money Saving Expert seems to have reached the same conclusion: > even if you slash that solar battery price (and therefore payback time) by 50%, the typical user will still struggle to to pay it off through savings within its 15ish-year lifespan. Ultimately, I'd rather have cheap electricity and good export rates than have them change and make the sums look better. * * * ### What We Could Do Extending the battery isn't a viable financial option, but there are things that we _could_ do: * **Reduce consumption** : every kWh of consumption saved is one less unit to pay grid prices for (and in summer might also mean another kWh of export) * **Add multi-purpose storage** : buying a battery might not make sense, but at some point I _am_ going to have to get a new car. With a charger that's able to let an EV supply the house, we'd gain a large storage increase as a side effect of something that doesn't need to justify its own cost via electricity savings alone. * **Add an islanding switch** : It'd add a couple of grand to our costs, but we'd derive _some_ benefit from the house continuing to operate during power cuts. It's hard to assign a value to that, and power cuts are rare, but the benefit is definitely not 0. The final two options have something in common: they introduce a significant area of fuzziness into ROI equations. How do we attach an accurate value to operating through a powercut or maintaining mobility/independence? The answer is almost certainly that the fuzziness provides psychological insulation from what might still be a questionable investment choice. I'm **totally** up for that. * * * ### Conclusion It's a shame. I was really hoping that the cheaper module price might allow me to shift from "the battery was a mistake" to being able to talk about making gains. I had thought that the original purchase price might have been weighing us down, but the Go calculations suggest that, even at 1/3 of the original price, household batteries still don't really make financial sense. For the battery to work financially, we'd need there to be a bigger difference between low and high prices each day. But, whilst that might help the battery deliver ROI, we'd probably still be worse off overall. I think the answer is to view the battery differently: what we've done is paid upfront to reduce our monthly bills by ~10%, with a premium attached3. It's a little like buying an annuity, but one that doesn't actually guarantee the level of income4. The path forward for us is not to add capacity but to do the things that were already likely: reduce consumption and, at some point, replace the car. * * * 1. See what I did there? ↩ 2. We're currently on Winter settings, so min SoC is set to 30% rather than 20% ↩ 3. Over the course of the battery's lifetime, inflation may eat that premium away. ↩ 4. That's not really making it better, is it? ↩
www.bentasker.co.uk
October 31, 2026 at 12:30 PM
🔋 I just wanted to check my Pylontech batteries, but BatteryView is Windows-only and stopped working in my VM. So I ended up vibe-coding my own tools. 🙂

Now there's a cross-platform Python CLI and docs exploring the firmware, including SOH calculation.
GitHub - nijel/pylontech-tools
Contribute to nijel/pylontech-tools development by creating an account on GitHub.
github.com
October 26, 2026 at 3:59 PM
Ja, es ist eigentlich ein, für Laien, kaum lösbarer Knoten. Ich habe es mit Youtube von Panda-Solar hinbekommen. Dazu noch Einarbeitung in die komplette Dokumentation. Wenn man das noch nie gemacht hat, steckt da viel zeit drin.

www.youtube.com/watch?v=-6A0...
Victron Multiplus II Installation des ESS Systems / Pylontech Energiespeicher nachrüsten
YouTube video by Panda-Solar
www.youtube.com
October 8, 2026 at 3:58 AM
BlueNova vs Pylontech – Which Home Battery is Better?

Confused between BlueNova and Pylontech for your home battery system?

In this reel, we break down the key differences so you can make a smarter decision for your solar setup

solarbazaar.io
September 30, 2026 at 11:21 AM
Pylontech and IAN Solar Officially Unveil the Fidus Battery Max in the Philippines, Elevating Energy Storage Capabilities
Pylontech, a global provider of energy storage solutions, marked a major milestone in the Philippine renewable energy industry with the launch of its latest energy storage innovation, the Fidus Battery Max, during the “Power Beyond Limits – Fidus Max Launch Event 2026” held on September 17 at Forbes Ballroom 1, Conrad Manila. The event marked Pylontech’s first product launch in the Philippines, bringing together industry partners, energy professionals, customers, media representatives, and other key stakeholders to witness the introduction of the Fidus Battery Max and explore the evolving landscape of energy storage in the country. Carrying the theme “Power Beyond Limits,” the launch highlighted Pylontech’s commitment to delivering innovative, reliable, and scalable energy storage solutions designed to address the changing energy needs of modern households and businesses. The formal program opened with a speech by Lance Sun, Pylontech SEA Sales Director, followed by a company introduction highlighting Pylontech’s global energy storage portfolio and its vision for the Philippine market. As renewable energy adoption continues to expand, energy storage is becoming an increasingly important component of modern power systems. Battery energy storage systems can help users store excess renewable energy, strengthen backup capabilities, and optimize energy use according to their specific requirements. Against this backdrop, Pylontech presented the Fidus Battery Max, its latest energy storage solution designed to provide flexible and high-capacity energy storage for a range of applications. The centerpiece of the program was the Fidus Max Product Launch Presentation, led by Simon Tao, who provided an in-depth overview of the new battery system, including its capabilities, design, and potential applications. The Fidus platform is designed around scalability and flexibility, featuring IP65 protection, C5-M anti-corrosion protection, natural cooling, CAN/RS485 communications, and flexible system configurations. Depending on the specific model, the Fidus series also supports extended operating conditions and monitoring through Bluetooth and Wi-Fi. These features are designed to support energy storage applications where reliability, scalability, and environmental resilience are important considerations. For the Philippine market, the Fidus Battery Max provides an energy storage option for homeowners and energy users seeking to maximize solar energy utilization, strengthen backup capabilities, and enhance energy resilience. Following the product presentation, the event proceeded to one of its key highlights—the official Fidus Max Unveiling Ceremony. Lance Sun, Pylontech SEA Sales Director, and Sam Daguro, IAN Solar PH Country Manager, joined the stage to officially unveil the Fidus Battery Max and mark its introduction to the Philippine market. The unveiling represented an important milestone for Pylontech as it formally introduced its latest energy storage innovation to Philippine customers, partners, and industry stakeholders. More importantly, the occasion underscored the role of collaboration among technology providers, distributors, installers, system integrators, and customers in supporting the continued adoption of renewable energy and energy storage technologies in the Philippines. Through strong industry partnerships, Pylontech and its local partners aim to help make advanced energy storage solutions more accessible to the Philippine market and support the evolving energy requirements of households and businesses. Pylontech is a global energy storage technology company specializing in the development, manufacturing, and delivery of battery energy storage solutions. Established in 2009, the company provides solutions for residential, commercial, industrial, and other energy storage applications, with its products deployed across more than 90 countries and regions. IAN Solar Energy Corp. (IAN Solar) is a Philippine solar energy company providing solar panels, batteries, inverters, accessories, and related renewable energy solutions. The company works with global technology brands and local industry partners to support the growing adoption of solar power and energy storage solutions in the Philippines, including Pylontech energy storage systems. The “Power Beyond Limits – Fidus Max Launch Event 2026” marked the beginning of a new chapter for Pylontech in the Philippines, bringing together innovation, technology, customer experience, and industry partnerships under one platform. With the introduction of the Fidus Battery Max, Pylontech expands its energy storage portfolio in the Philippine market while responding to the growing demand for reliable, scalable, and flexible energy solutions. As the Philippines continues to embrace renewable energy, battery storage can play an important role in helping households and businesses better manage the energy they generate and consume. Through the launch of the Fidus Battery Max, Pylontech and IAN Solar continue to support the development of a more resilient and sustainable energy future for the Philippines.
www.azraelsmerryland.com
September 25, 2026 at 8:05 PM
Pylontech Launches Mass Production of Advanced LFP Cells for Energy Storage Solutions#China#Energy_Storage#Hefei#Pylontech#LFP_Cells
Pylontech Launches Mass Production of Advanced LFP Cells for Energy Storage Solutions
Pylontech has initiated the mass production of high-capacity 588 Ah and 601 Ah prismatic LFP cells, enhancing their position in the energy storage market globally.
third-news.com
September 23, 2026 at 10:01 AM
Pylontech Launches Mass Production of New 588Ah and 601Ah LFP Cells for Energy Storage Systems#China#Energy_Storage#Hefei#Pylontech#LFP_Cells
Pylontech Launches Mass Production of New 588Ah and 601Ah LFP Cells for Energy Storage Systems
Pylontech officially begins mass production of its innovative prismatic LFP cells in capacities of 588Ah and 601Ah, enhancing energy storage solutions.
third-news.com
September 23, 2026 at 9:28 AM
Pylontech Launches Mass Production of LFP Cells for Energy Storage Systems#China#Energy_Storage#Hefei#Pylontech#LFP_Cells
Pylontech Launches Mass Production of LFP Cells for Energy Storage Systems
Pylontech has begun mass production of its 588Ah and 601Ah prismatic LFP cells aimed at enhancing energy storage systems and expanding its market presence.
third-news.com
September 23, 2026 at 3:25 AM
Pylontech Launches Mass Production of 588Ah and 601Ah LFP Cells for Energy Storage Solutions#China#Energy_Storage#Hefei#Pylontech#LFP_Cells
Pylontech Launches Mass Production of 588Ah and 601Ah LFP Cells for Energy Storage Solutions
Pylontech has officially commenced mass production of its new prismatic LFP cells, enhancing energy storage solutions with advanced technologies and high performance.
third-news.com
September 23, 2026 at 3:36 AM
Pylontech Advances Energy Storage Solutions with New LFP Cells Production#China#Energy_Storage#Hefei#Pylontech#LFP_Cells
Pylontech Advances Energy Storage Solutions with New LFP Cells Production
Pylontech has launched mass production of innovative LFP cells with 588Ah and 601Ah capacity, enhancing energy storage efficiency for ESS applications.
third-news.com
September 22, 2026 at 8:08 PM
Pylontech Launches Mass Production of LFP Cells for Large-Scale Energy Storage Systems#China#Energy_Storage#Hefei#Pylontech#LFP_Cells
Pylontech Launches Mass Production of LFP Cells for Large-Scale Energy Storage Systems
Pylontech has begun mass production of 588Ah and 601Ah LFP cells for large-scale energy storage systems, marking a significant expansion in energy storage technology.
third-news.com
September 22, 2026 at 7:56 PM
Pylontech Launches Mass Production of High-Capacity LFP Cells for Energy Storage Solutions#China#Energy_Storage#Hefei#Pylontech#LFP_Cells
Pylontech Launches Mass Production of High-Capacity LFP Cells for Energy Storage Solutions
Pylontech has commenced mass production of 588Ah and 601Ah prismatic LFP cells aimed at enhancing energy storage system capabilities, boosting efficiency and safety.
third-news.com
September 22, 2026 at 5:55 PM
Pylontech Begins Mass Production of New LFP Cells for Energy Storage Systems#China#Energy_Storage#Hefei#Pylontech#LFP_Cells
Pylontech Begins Mass Production of New LFP Cells for Energy Storage Systems
Pylontech has launched mass production of its advanced 588Ah and 601Ah prismatic LFP cells for energy storage systems, enhancing market presence.
third-news.com
September 22, 2026 at 5:56 PM
Pylontech Begins Full-Scale Production of Advanced LFP Cells for Energy Storage Solutions#China#Energy_Storage#Hefei#Pylontech#LFP_Cells
Pylontech Begins Full-Scale Production of Advanced LFP Cells for Energy Storage Solutions
Pylontech has initiated mass production of its innovative 588Ah and 601Ah prismatic LFP cells for energy storage systems, marking a significant advancement in technology and efficiency.
third-news.com
September 22, 2026 at 2:40 PM
Pylontech Launches Mass Production of Advanced 588Ah and 601Ah Cells for Energy Storage Systems#China#Energy_Storage#Hefei#Pylontech#LFP_Cells
Pylontech Launches Mass Production of Advanced 588Ah and 601Ah Cells for Energy Storage Systems
Pylontech begins mass production of innovative 588Ah and 601Ah prismatic LFP cells, enhancing energy storage solutions for utility-scale projects.
third-news.com
September 22, 2026 at 2:12 PM
En el VEM me hicieron un presupuesto con unas baterías reguleras (pylontech) y ya me costaba 10.200 y con inversor regulero también.

Otros con baterías TAB me pedían 12.300.

El de las baterías BYD me parece el mejor presupuesto que he tenido.
August 30, 2026 at 11:40 PM
Nein, die Pylontech hängen zwar zusammen an Dr Gleichstromschiene, aber hier holen sich nur die Wechselrichter-Ladegeräte ihre Verbindung.

Die PV ist AC-Seite gekoppelt und speist ins Hausnetz.
May 2, 2026 at 8:26 AM
Das macht das BMS in den Pylontech von ganz allein sobald mehr als 95% Akkustand.

Im Winter könnte man händisch einmal den Befehl zum Vollladen anstoßen um das Balancing durchzuführen.
Sehe ich aber nicht als notwendig.
March 3, 2024 at 11:53 AM