RAKwireless has just launched the WisGate Connect Router RAK7392 (not to be confused with the older WisGate Connect RAK7391), an industrial-grade edge

GPIO access, sensor and IO slots, three gigabit ports and a 2.5-gig-Ethernet port in a passively-cooled housing.

RAKwireless has just launched the WisGate Connect Router RAK7392 (not to be confused with the older WisGate Connect RAK7391), an industrial-grade edge

RAKwireless has just launched the WisGate Connect Router RAK7392 (not to be confused with the older WisGate Connect RAK7391), an industrial-grade edge router and gateway built around Raspberry Pi Compute Module 4/5 (CM4/CM5). The system features three Gigabit Ethernet ports, one 2.5GbE port, wireless expansion via a mini PCIe slot, and WisBlock connectors for sensors and I/O modules. The gateway is designed for industrial IoT applications such as edge computing, VPN, Modbus-to-MQTT conversion, and LoRaWAN packet forwarding, eliminating the need for multiple boards and USB adapters for complex deployments. WisGate Connect Router RAK7392 specifications: SoM options (one or the other) Raspberry Pi CM4 – Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5 GHz Raspberry Pi CM5 – Broadcom BCM2712 quad-core Cortex-A76 processor @ 2.4 GHz Storage and Memory will depend upon the module Storage – MicroSD card socket for CM4/CM5 Lite modules only Networking 3x Gigabit Ethernet ports (eth1, eth2, eth3) [...] The post Raspberry Pi CM4/CM5-based WisGate Connect Router RAK7392 offers 2.5GbE, mini PCIe, and WisBlock expansion appeared first on CNX Software - Embedded Systems News.

Library for the RAK13006 CAN bus module. Contribute to RAKWireless/RAK13006-MCP2518 development by creating an account on GitHub.

RAKwireless has sent us a sample of the WisMesh Station, a Meshtastic gateway and base station based on a Raspberry Pi 4 Model B, a WisMesh Pi HAT RAK6421

RAKwireless has sent us a sample of the WisMesh Station, a Meshtastic gateway and base station based on a Raspberry Pi 4 Model B, a WisMesh Pi HAT RAK6421

RAKwireless has sent us a sample of the WisMesh Station, a Meshtastic gateway and base station based on a Raspberry Pi 4 Model B, a WisMesh Pi HAT RAK6421 expansion board, a LoRa module, a GNSS module, all housed in a compact metal enclosure. It comes with meshtasticd preinstalled, making it ready to use right out of the box. Just unbox it, plug it in, and start using Meshtastic immediately. We’ll also use software packages for communication, data storage, and visualization, such as MQTT, Node-RED, InfluxDB, and Grafana, mostly following RAKwireless’s user guide WisMesh Station is available in 2 models according to transmit power: the standard RAK8622 model that uses the RAK13300 LoRa module (Semtech SX1262 with 22 dBm transmit power), suitable for urban networks where nodes are close to each other, and the high-power RAK8623 (HP) model that uses the RAK13302 module (SX1262 + SKY66122 amplifier circuit with 30 [...] The post WisMesh Station Review – Telemetry, MQTT, and Grafana tested on a Raspberry Pi 4-based Meshtastic gateway appeared first on CNX Software - Embedded Systems News.

YouTube video by Digital Rancher

YouTube video by Ham Radio Crash Course

KEEPTEEN D5L Mesh Solar LoRa Repeater Built in RAKWireless 19007+4631 LoRa Modules Board Compatible with Meshtastic Meshcore Node Devices,915mhz Antenna SolarPanel Built in 5000mAh Battery Controller ...

RAKwireless Audio library or the audio solution Modules - RAKWireless/RAKwireless-Audio-library

RAKwireless WisMesh Pi HAT RAK6421 is a modular Meshtastic gateway expansion board for Raspberry Pi 4/5 that adds support for the company’s WisBlock

RAKwireless WisMesh Pi HAT RAK6421 is a modular Meshtastic gateway expansion board for Raspberry Pi 4/5 that adds support for the company’s WisBlock ecosystem. Designed for users running meshtasticd...

The WisMesh Pi HAT RAK6421 acts as a carrier for WisBlock LoRa transceivers, as well as optional GNNS receivers and sensors.

RAKwireless WisMesh Pi HAT RAK6421 is a modular Meshtastic gateway expansion board for Raspberry Pi 4/5 that adds support for the company’s WisBlock ecosystem. Designed for users running meshtasticd (the Linux-native Meshtastic service), it enables scalable, always-on Meshtastic base stations, MQTT gateways, and backbone relay nodes. Unlike other LoRa solutions based on Raspberry Pi, the RAK6421 takes a modular approach. Instead of a built-in radio, it offers two WisBlock IO slots and four sensor slots, allowing users to easily plug in or swap modules. This means you can choose between standard LoRa modules like the RAK13300 or higher-power 1W versions like the RAK13302, without dealing with messy USB adapters or breadboard wiring. RAK6421 WisMesh Pi HAT RAK6421 specifications: Compatibility Raspberry Pi 4, Raspberry Pi 5, and Raspberry Pi Zero 2W SBCs Potentially other SBC with standard 40-pin Raspberry Pi GPIO header (HAT+ compliant) Expansion 2x WisBlock IO slots for LoRa radio [...] The post RAKwireless WisMesh Pi HAT RAK6421 turns your Raspberry Pi 4/5 into a modular Meshtastic gateway appeared first on CNX Software - Embedded Systems News.

RAKwireless WisMesh Pi HAT RAK6421 is a modular Meshtastic gateway expansion board for Raspberry Pi 4/5 that adds support for the company’s WisBlock

RAKwireless WisMesh Pi HAT RAK6421 is a modular Meshtastic gateway expansion board for Raspberry Pi 4/5 that adds support for the company’s WisBlock ecosystem. Designed for users running meshtasticd (the Linux-native Meshtastic service), it enables scalable, always-on Meshtastic base stations, MQTT gateways, and backbone relay nodes. Unlike other LoRa solutions based on Raspberry Pi, the RAK6421 takes a modular approach. Instead of a built-in radio, it offers two WisBlock IO slots and four sensor slots, allowing users to easily plug in or swap modules. This means you can choose between standard LoRa modules like the RAK13300 or higher-power 1W versions like the RAK13302, without dealing with messy USB adapters or breadboard wiring. RAK6421 WisMesh Pi HAT RAK6421 specifications: Compatibility Raspberry Pi 4, Raspberry Pi 5, and Raspberry Pi Zero 2W SBCs Potentially other SBC with standard 40-pin Raspberry Pi GPIO header (HAT+ compliant) Expansion 2x WisBlock IO slots for LoRa radio [...] The post RAKwireless WisMesh Pi HAT RAK6421 turns your Raspberry Pi 4/5 into a modular Meshtastic gateway appeared first on CNX Software - Embedded Systems News.

Order today, ships today. RAK4631-9-SM-MESH-STARTER – nRF52840, RAK4630, RAK4631, RAK19007, SX1262 - Bluetooth® 5.x (BLE), LoRa® (LoRaWAN®) Transceiver 915MHz, 2.4GHz Evaluation Board from RAKwireless...

submitted by empireOfLove2 to meshtastic 4 points | 1 comments I got some WisBlock base station stuff on order from RAKwireless, as I am in need of a high power base station at my GF’s house. It’s going to get something resembling coverage in an entire half of my city that has no nodes apparently- and I’m going to double it up as a ping-able weatherstation too. I made the order on the 3rd and it still hasn’t indicated it has shipped yet, which is mildly concerning. Most storefronts seem to ship in less than a week. Anyone else ordered stuff from them before and had it take ages? I swear I gotta get this done before my ADHD completely drops this hobby lol I ordered from their international site as the Rokland US site was out of stock of a lot of stuff. Maybe that’s my problem. I’d still expect it to show “shipped”.