#headform
(Note: The filtration efficiency shown in the test charts reflects the fit between the mask and the headform, rather than the intrinsic filtration capacity of the KN100-rated material itself.) This demonstrates an advancement in the new filtration material.
November 5, 2026 at 4:47 AM
Buy two identical cheap Spirit Halloween masks, put one on a headform, glue it to a set of secondhand football pads, wear the other and go as Beeblebrox going as something else
October 31, 2026 at 12:55 AM
The reason they look 'tram-style' is because Transport for London's Bus Safety Standard requires new buses to have a sloped front-end design to reduce the impact of injuries, which is why they look similar to a tram. 🤔
tfl.gov.uk/corporate/tr...
tfl.gov.uk/corporate/pr...
October 23, 2026 at 7:37 AM
Not a bad guess, but this is specifically based on "tests [that] measure injury risks to the head, hips, legs, and knees using three impact scenarios:
Child and adult headform impacts to the hood and windshield area
Upper leg impacts to the hood's leading edge
Full lower-limb impacts to the bumper
October 6, 2026 at 9:21 PM
Balaclava is still my favorite style to make. Soft! Anyone can do this without a big investment. Add basic layers, then sculpt! (my fav part)

#fursuitfriday #fursuitmaker #diy
August 1, 2025 at 6:28 PM
Beginnings of a doggo
July 29, 2025 at 11:01 PM
September 26, 2025 at 8:00 PM
As I am not known for my restraint, there are now matching mitts.

And of course they, like the hat, are in both a solid color version and a contrast color version.

Because a bit of excess in one's knitting seems fairly harmless, all things considered.

🧶 (blatant self promotion)
October 18, 2023 at 2:02 PM
Prepping the Halloween costume for tonight
October 28, 2023 at 2:14 PM
Went looking through old things I've done, and found pics of this prosthetic I sculpted and then slush cast in latex over 10 years ago.

I should do something like this again sometime.
April 8, 2024 at 1:42 AM
The Most Human Robots Yet! (From Ling CX2 Ameca Sophia to Headform)
Are we on the brink of a world where robots not only think—but feel? In this electrifying episode of “The Rise of Sentient Machines,” we dive deep into the astonishing advancements in artificial intelligence and robotics that are blurring the line between human and machine. Meet the new generation of humanoid robots—like Headform’s expressive androids, Sophia, Ameca, and the Ling CX2—who are not just mimicking our faces, but understanding our emotions, learning autonomously, and even holding conversations that feel eerily real. We’ll explore how these sentient machines are crossing the infamous “uncanny valley,” and what it means for the future of human-robot interaction. But with great intelligence comes even greater questions: Could AI develop consciousness? Should robots have rights? And what happens when machines start demanding a seat at the table? Packed with jaw-dropping stories, ethical dilemmas, and a dash of wit, this episode is your front-row ticket to the future of AI, robotics, and the very definition of what it means to be human. Whether you’re a tech enthusiast, a sci-fi fan, or just curious (and maybe a little nervous) about the rise of sentient machines, you won’t want to miss a second. Ready to challenge your idea of reality? Hit play, subscribe, and share this episode with your fellow humans—before the robots beat you to it!
www.spreaker.com
July 18, 2025 at 10:25 AM
I keep about 10lbs on hand but rarely use it all! Unless you sculpt really big you can probably get by with one 5lb kit for the average mask base on a mannequin headform
April 23, 2026 at 4:56 PM
The masks were fitted tightly to a silicone mask testing headform attached to a Scince SC-MBT-2032 filter testing machine set to test at 85 lpm.

The accuracy of the testing depends on getting a good mask seal on the headform. Results should be considered approximate.
February 17, 2026 at 7:55 AM
But a lot of sturm und drang about it on Reddit. link.springer.com/article/10.1…
Age has a Minimal Effect on the Impact Performance of Field-Used Bicycle Helmets - Annals of Biomedical Engineering
Helmet manufacturers recommend replacing a bicycle helmet after an impact or after anywhere from 2 to 10 years of use. The goal of this study was to quantify the effect of helmet age on peak headform acceleration during impact attenuation testing of field-used bicycle helmets. Helmets were acquired by donation from consumers and retail stores, and were included in the study if they were free of impact-related damage, had a legible manufacture date label, and were certified to at least one helmet standard. Helmets (n = 770) spanning 0–26 years old were drop tested to measure peak linear headform acceleration during impacts to the right and left front regions of the helmets at two impact speeds (3.0 and 6.2 m/s). General linear mixed models were used to assess the effect of age and three covariates (helmet style, size and certification impact speed) on peak acceleration. Overall, age was related to either no difference or a statistically significant but small increase (≤0.76 g/year of helmet age) in peak headform acceleration. Extrapolated across 20 years, age-related differences were less than both style- (traditional vs. BMX) and size-related differences. The age-related differences were also less than the variability observed between different helmets after accounting for style, size and certification effects. These findings mean that bicycle helmets (up to 26-year-old traditional helmets and 13-year-old BMX helmets) do not lose their ability to attenuate impacts with age; however, other helmet features that may change with age were not evaluated in this study.
link.springer.com
July 25, 2026 at 9:57 PM
Completed hat commission for Allan A. Of “alexi!” Thanks for the opportunity to bring your fantastic character to life on a hat!

#furryArt #fursona #embroidery #commissions #fursuit #art
July 31, 2024 at 12:30 AM
Couple more (arctic wolf rug/blanket is part of my personal collection. He was a sanctuary animal that passed and was tanned in the early 90’s that I managed to restore and put a headform in. His name is Wraith and he’s a great blanket!)
July 4, 2023 at 8:21 PM
contemplating whether or not I'd actually shave my head if someone bought this for me →
Klaus Nomi's wig: the hilarious hairpiece that secured Nomi's first record deal
Klaus Nomi's wigRodney Gordon[New York]: Rodney Gordon, ca early 1980s. Wig stored on wooden headform with hair line drawn on. Approx. 12 x 6 in.After performing on SNL to acclaim and notoriety, Klaus Nomi and Joey Arias continued to refine their show before they decided Nomi ought to cut a record. Arias says that after months of getting jerked around by labels, with deals almost coming through before falling apart, Nomi entered a fit of rage. Declaring, "I can't look at myself anymore!" he shaved his head right there in front of Arias. But just days later, his manager called to say that he thought he'd secured a record deal with RCA France, and that they wanted to meet him in ten days. Upon learning that Nomi had impulsively shaved his head, his manager insisted that he could not show up like that. So, he and Arias quickly had a wig made, which Nomi wore to the meeting — and every single day until his signature hair grew back (though he would soon have less and less of it). The wig was designed by milliner Rodney Gordon, who went on to design hats, masks, and headpieces for Broadway and other theatrical productions.Condition as described in catalogue note. For further information on the condition of this lot please email info@boo-hooray.com. All lots are sold on an "as is" basis at the time of sale. Images form a part of the condition description for each lot, though images online may represent hues and shades which differ from the actual item.
www.basta.app
November 7, 2025 at 2:21 PM
Parts 1-2/2 — EFTA01188103.jpg
#epsteinweb #efta01188103
https://epsteinweb.org
Available in the iOS app store now!
https://apps.apple.com/us/app/epstein-web/id6758880661
May 12, 2026 at 10:04 PM
Parts 1-2/2 — EFTA00301487.jpg
#epsteinweb #efta00301487
https://epsteinweb.org
Available in the iOS app store now!
https://apps.apple.com/us/app/epstein-web/id6758880661
April 26, 2026 at 7:22 PM
Parts 1-2/2 — EFTA02707021.jpg
#epsteinweb #efta02707021
https://epsteinweb.org
Available in the iOS app store now!
https://apps.apple.com/us/app/epstein-web/id6758880661
April 18, 2026 at 9:16 PM
Got this mask from the same seller who traded the Gargoyle (see previous post). I already started doing work on this guy but need to clear off a headform to move forward. He can go a few directions and am lookingb forward to it!
May 21, 2026 at 7:44 PM