In our 10Gtek Intel i350-am4 quad port 1GbE NIC review, we decided to buy and test a newer card based on the well-known chipset The post 10Gtek Intel i350 Quad Port 1GbE NIC Review appeared first on ServeTheHome.

I have configured vlans on **Intel network adapter I350** with PROset app in Windows 10, but after the Windows11 updates, I couldnt find any driver supdate which supports PROSet and to configure VLANs. The latest Driver Package available is  Wired_driver_29.3_x64.zip & it doesnt support PROset. Intel® Network Adapter Driver for Microsoft* Windows* 11 'The Microsoft Windows* download package for Microsoft Windows 11* consists of the driver package only.  Intel PROSet and Intel ANS are not supported on Microsoft Windows 11*.' Can someone help me to configure vlans on intel I350 adapter on WIndows11?

YouTube video by Mallen Baker

YouTube video by Mallen Baker

冠峰网络科技（深圳）有限公司办公室地址位于中国个经济特区,于2016年08月29日成立,注册资本为205.0000万元,主要经营网络技术开发、计算机软硬件开发；智能化系统集成；音响、灯具、通讯器材、计算机硬件、安防监控设备、智能家居用品、办公用品、办公设备耗材、办公家具、工艺品的销售；经营电子商务；LED工程、夜景工程、网络工程的施工；电线、电缆、光纤、网络设备、电子产品、电子设备的上门安装、上门...

Trying to pass MDI compliance and the only portion that is failing is the MDI compliance transmission distortion (test 4) by small margin. We have the same setup as previous projects, but the margin is barley failing. Margin is 10mV but we are around 10.18mV so its .18mV over with 2850mil trace length at the longest point. They go to Mag-jack devices so this shouldn't be an issue. These are straight fed from the i350 to the mag-jack devices.

Trying to pass MDI compliance and the only portion that is failing is the MDI compliance transmission distortion (test 4) by small margin. We have the same setup as previous projects, but the margin is barley failing. Margin is 10mV but we are around 10.18mV so its .18mV over with 2850mil trace length at the longest point. They go to Mag-jack devices so this shouldn't be an issue. These are straight fed from the i350 to the mag-jack devices.

Hello, I would like to use I350-AM4 in our board, but we want to use Fiber instead of copper, so we need to rewrite the Image of EEPROM. However, we are currently missing the image file of EEPROM and the tool for eeupdate64e. Could you please send me a eeupdate tool?

Hello. I have several i350 network controllers in use that require special setting. How can i distribute or monitor these settinggs centrally. Advanced settings in the driver. (Powermanagment)

Hello, we use the Intel i350 T2 network card for several workstations. Some workstations are experiencing the following problem: If we unplug the network cable from one port, the other port suddenly stops sending data as well. If we swap the card with another workstation, the error persists. What could be the cause? The cards are all identical. Best Regards, Michael

Hello All and hopefully this posting is right place. I'm development and Ethernet Adapter using I350-AM2, with port 0 for RJ45 and Port 1 for SFP. but right now do not have any firmware support it. do you have any firmware for it or any guide to develop firmware for this purpose? and another question is can i disabled/enable Port 1 by any tools or config? Thanks Uy