#3DPrintingTips
A box with a lid that actually fits, designed free in Layerling, a CAD program in your browser. 0.2 mm gap per side, checked on screen before you print.

Full video, every kind of lid: https://youtu.be/CsmECflPWLI

#3dprinting #cad #layerling #3dprintingtips
November 15, 2026 at 5:07 AM
How does a printer make a joint that already moves? A gap, 45° cones and the right settings. Built in Layerling, free in your browser.

Full video on YouTube: https://youtu.be/hBrOON0i11o

#3dprinting #3dprintingtips #printinplace #layerling
November 17, 2026 at 1:05 PM
Gyroid, cubic or triangles? Each one can win. It depends on how the part gets loaded. Every pattern here is a real Bambu Studio slice.

Full video on YouTube: https://youtu.be/3VjYNYwChow

#3dprinting #3dprintingtips #infill #bambulab
November 16, 2026 at 9:30 PM
Will the lid fit? Cut your design open on screen with Section view in Layerling, free in your browser, and see the 0.2 mm gap before you print.

Full video, every kind of lid: https://youtu.be/CsmECflPWLI

#3dprinting #cad #layerling #3dprintingtips
November 17, 2026 at 8:00 PM
TPU can tear the coating right off your build plate. The right plate, a cool bed, the external spool and a slow peel, in 30 seconds.

Full video on YouTube: youtu.be/NbYVvqfk1AE

#3dprinting #tpu #3dprintingtips #bambulab #buildplate
November 11, 2026 at 4:31 PM
A PLA phone mount can droop like a candle in a parked car. Pick your filament by the job: PLA, ASA, PETG or TPU, and what to check first.

Full video on YouTube: https://youtu.be/ZHXa13-CfIo

#3dprinting #3dprintingtips #filament #bambulab #learnontiktok
November 12, 2026 at 10:51 PM
Plate looks clean but prints keep lifting? Why soap beats a quick alcohol wipe on textured plates, in 30 seconds.

Full video: https://youtu.be/mzi9-scMCAI

#3dprinting #buildplate #bambulab #3dprintingtips
November 11, 2026 at 10:59 PM
0.4, 0.6 or 0.2? Speed, strength, filament use and the hardened steel rule, in under 40 seconds.

Full video on YouTube: youtu.be/W68Sat_Qiso

#3dprinting #3dprintingtips #nozzle #bambulab #3dprinter
November 11, 2026 at 11:00 PM
Print broke? Before you turn up the infill, try more walls. Bending stress sits in the outer shell, and that's where your walls are.

Full video on YouTube: youtu.be/1Y3BxZFpgPU

#3dprinting #3dprintingtips #bambulab #infill #3dprint
November 11, 2026 at 11:01 PM
Print won't stick, or won't come off? Smooth vs textured PEI, glue as a release layer, and the free fix, in about 30 seconds.

Full video: https://youtu.be/O5Py6rgCOsA

#3dprinting #buildplate #bambulab #3dprintingtips
November 11, 2026 at 10:59 PM
Every filament has a weak spot, and the wrong one can ruin a good print. Seven filaments, fast, in under a minute. Full video on my YouTube channel, The Layers Explained-TV.

#3dprinting #3dprintingtips #filament #bambulab
November 11, 2026 at 10:58 PM
Supports wrecking the underside of your prints? Start with the top gap: half a layer to one layer, then nudge it. Trees for shapes, normal for flats.

Full video on YouTube: youtu.be/vaIQ2YV8C_M

#3dprinting #3dprintingtips #treesupports #3dprint #supports
November 11, 2026 at 11:01 PM
Why does the top of your dome look like a contour map? Those rings are stair steps, and adaptive layer height makes them much smaller.

Full video on YouTube: youtu.be/Q7JFPJH-q3w

#3dprinting #3dprintingtips #prusaslicer #bambulab #learnontiktok
November 11, 2026 at 10:59 PM
Understanding Nozzle Sizes 🖨️✨
Tiny change. Big difference in your 3D print.

🔍 0.2 mm → Fine details
⚖️ 0.4 mm → Balanced choice
⚡ 0.6 mm → Faster printing
🚀 0.8 mm → More speed, less fine detail

🌐 www.congeriem.com

#3DPrinting #3DPrintingTips #3DPrinter #UniversityMakerspace #Congeriem
October 22, 2026 at 5:51 PM
What is Layer Height? 🖨️✨

Layer height is the thickness of each individual layer printed by a 3D pance between detail, surface finish, and print time. UltiMaker

🌐 www.congeriem.com

#3DPrinting

#3DPrintingTips

#3DPrintingEducation

#UniversityMakerspace

#Congeriem
September 28, 2026 at 7:20 PM
✨ Cleaner Supports. Better Details.
The Creality SPARKX i8 introduces a new way to handle support removal with Hyper Support-Breakaway, designed as a support interface for PLA.
🌐 www.congeriem.com
🎥 Video credit: CREALITY Official

#Creality
#SPARKXi8
#3DPrinting
#3DPrintingTips
#Congeriem
September 27, 2026 at 6:48 PM
If your print detaches mid-print, check your bed leveling and surface prep.
Clean bed, good first layer = fewer failures.
What's your go-to adhesion trick?

#3DPrintingTips #MakersGonnaMake #FDMPrinting
May 2, 2025 at 9:30 AM
I suggest always watching your models during their first few layers to make sure they stick well and don’t come loose. This will ensure the adhesion is successful. If you found this helpful let me know! #3Dprinting #3dprinter #bedadhesion #coolplate #3dprintingtips #tutorial #tips
May 9, 2025 at 5:51 PM
12/12 Bonus discussion: Printing ABS (use "ABS juice" for adhesion!) and alternative techniques like 100% infill + salt baking. Always something new to learn in the 3D printing world! #ABS #3DPrintingTips
May 5, 2025 at 9:56 AM
Industrial musts: Expert handling, calibration, post-processing & maintenance for flawless metal parts.

Which parameter trips you up? Comment! 👇

#DMLS #SLS3DPrinting #PrinterParameters #3DPrintingTips #EdTech #WOW3Dlearning
April 16, 2026 at 6:32 AM
February 12, 2026 at 6:33 AM