#PCMCIA
it was bugging me that i couldn’t figured out that acronym. i figured it was some kind of pcmcia thing but its for decryption.
November 17, 2026 at 11:59 PM
I know of Boeing 737s using floppies and PCMCIA cards for non-critical performance data in 2006. The cost uplift on these items because they were aircraft items was wild.
November 14, 2026 at 3:26 PM
The #AppleNewton #MessagePad 2100 w/ 162 MHz StrongARM 110 processor, 8 MB Mask ROM, 8 MB RAM, 2 PCMCIA slots, dual-mode IrDA-beaming capabilities, and Newton InterConnect port for multiple connectivity options, in a handheld case with a 4.9” x 3.3” LCD display for use with a stylus #RetroComputing
November 10, 2026 at 9:34 AM
in order to get this thing to see all the access points, it needs driver updates. to get them, it needs to be online.

so I'm using this cursed setup to do that.

that's a PCMCIA Wireless G card.

This laptop already supports Wireless G.

For some reason that works.
November 7, 2026 at 4:25 AM
Got a new in box PCMCIA network adaptor. Works just great on winxp.

Got it for less than 10 bucks on eBay.
Good score.
November 6, 2026 at 3:55 AM
I was thinking about that too though wasn't it a full on PCMCIA interface?
November 5, 2026 at 5:40 PM
Sorry you're correct it was PCMCIA!! I always mix them up
November 5, 2026 at 8:08 PM
It makes me think of how Commodore betted on PCMCIA cards with the A600 becoming a big thing and games and software would be distributed on them and would be more attractive than disks because of piracy concerns.
November 1, 2026 at 2:40 PM
I wonder if it was the ever versatile USB that killed PCMCIA cards. I have one in an old PC laptop and I remember seeing it in others. Though the only thing I used it for, the one I had was a network card.

It is an interesting technology that died.
November 1, 2026 at 3:58 PM
Y se está perdiendo poco a poco, ahora usan pcmcia e incluso SD.
October 30, 2026 at 11:00 PM
I think we have The Bastard Operator From Hell to blame for the AO3 outage
But there is not enoth exploding PCMCIA cards...
#AO3 #BOFH
October 30, 2026 at 2:43 PM
My first work laptop needed pcmcia card for network connectivity. Came with a token ring card.
October 28, 2026 at 12:37 PM
ok so who remembers pcmcia?
show up in the comments you old geezer
October 28, 2026 at 10:01 AM
Любители #retrocomputing слышали о плате #picopcmcia?
На борту эмулятор звуковухи, сетевухи, вифи (с шифрованием) и блютуза 🪠
Армия старых ноутбуков готова вернуться в строй

https://www.yyzkevin.com/picopcmcia/
PicoPCMCIA
This is a PCMCIA development board for retro-computing enthusiasts who want to experiment with audio, networking, and expansion on vintage laptops and mobile devices. While ISA users have enjoyed projects like PicoGUS and PicoMEM, PCMCIA users have long been limited to scarce legacy cards with narrow functionality — this board aims to change that. The project is fully open source, and while it is designed to encourage low-level experimentation and development, pre-built, community-provided firmware is available for users who want to test functionality without diving into the technical details. It is intended for hobbyist and development use and is not certified for production deployment. Reserve Now ## Device Compatibility This is a **Type II, 5V, 16-bit PC Card** designed for use in compliant PCMCIA sockets and should work in most devices. While I have not yet encountered a device advertising PCMCIA support that was incompatible, support for every device cannot be guaranteed. Power consumption varies depending on enabled functions; support for low-power devices such as the **HP 200LX** is considered mandatory, and the card has been tested to remain within the **150 mA** limit while using network functionality and storage emulation. On devices with very limited power budgets, **simultaneous use of networking and audio may require external power**. A short list of devices that I actively test on: * IBM PC110 * HP 200LX * Amiga 1200 * Apple Newton * HP Jornada 720 * Compaq LTE Elite * IBM Thinkpad 235 * IBM Thinkpad 240 * # Features Overview Built around the **RP2350** and leveraging the ISA-like nature of the PCMCIA bus, this project benefits greatly from **code interchangeability with other RP-based retro projects** , most notably **PicoGUS** and **PicoMEM**. This shared foundation allows features and improvements to move quickly between platforms, expanding functionality over time. # Wi-fi / Bluetooth The card has an onboard wireless module containing the **Infineon CYW43439** , same as found on the Raspberry Pi Pico W. This allows the card to attach to modern Wi-Fi networks (2.4GHz 802.11b/g/n WPA2). It can then emulate an NE2000 adapter and/or a dialup modem allowing the host computer to access the network as if it was wired, unaware it is wireless. Essentially every platform containing PCMCIA will have existing drivers to recognize and utilize the card as a modem or ethernet adapter making this a near universal option for all devices and platforms including rare devices such as the Apple Newton. It also has a Bluetooth which opens up a lot of possibilities for A2DP wireless audio streaming and wireless gamepads/mice. Software for these features Bluetooth features are still under development and is at a proof of concept stage. # Audio ## Hardware The card has an included Texas Instruments TLV320AIC3254 which calls itself a **“Very Low-Power Stereo Audio CODEC with programmable miniDSP”**. The main features of this device in our application are: * DAC that is fed high quality audio from the RP2354 over i2s * Amplified stereo headphone amplifier * Line out feeding the host device internal speaker (where supported) * Line in from the onboard midi sythesizer (see below) * Line in from external i/o connector for mixing external audio * Controlled by the RP2350 via i2c (controlling volumes etc). This is combined with a DREAM SAM2695 **“Low power single chip synthesizer with effects and built-in codec”** , this is the same chip used on the Serdashop Dreamblaster S2. It is a great device for DOS gaming and other applications, its main features are: * 64-voice polyphony (without effects) * 38-voice polyphony + effects * CleanWave soundset * General MIDI compatible effects * 4-band stereo equalizer ## MPU-401 Emulation of intelligent mode MPU-401 is possible thanks to implementation done by PicoGUS base on SoftMPU/HardMPU. The midi output is driven to the internal SAM2695 as well as to an external Midi port. While using external Midi you are able to mute the internal SAM2695, or if you are not using any of the internal sound hardware you can power it down. Planning has been done with the external GPIO to support MIDI IN if ever implemented. ## Sound Blaster Emulation Sound Blaster emulation on PCMCIA is particularly challenging, as most PCMCIA sockets and cards lack native DMA support. To address this, the PicoPCMCIA implements **DMA emulation** , similar in spirit to the approach used by the infamous IBM 3D Sound card, resulting in good compatibility with many real-mode and protected-mode games — including the obligatory _Doom_. The IBM card was essentially the only card to offer this functionality, it seems it may have been that way due to IBM patenting (expired) the concept of DMA emulation with PCMCIA. The core Sound Blaster emulation developed for PicoPCMCIA has been shared with the PicoGUS project, where it is actively used and has greatly benefited from additional community-contributed improvements. **Adlib/OPL** emulation is borrowed from the PicoGUS implementation. ## Gravis Ultrasound (GUS) Thanks to the incredible work from the PicoGUS, it is now possible to have the worlds first PCMCIA Gravis Ultrasound! Currently this does not support DMA so only some games/demos work. The GUS is a little bit different with its use of TC, but it may be possible to apply the DMA emulation strategies from the SoundBlaster mode to the GUS. ## CD-ROM Audio The card implements an emulated Panasonic MKE CD-ROM which an be used for both data and audio. The audio at full quality is sent to the TI DSP over i2c and can be used simultaneously with all the other audio functions. This code was shared to the PicoGUS and is currently in use there and has been improved by the community. # Storage Emulation While storage emulation is not a primary focus given the ready availability of solutions like CompactFlash, it is supported and continues to evolve. Current implementations include Panasonic MKE CD-ROM emulation as well as linear flash emulation, and ATA/ATAPI emulation should be possible in the future once the PicoIDE project becomes available and code can be shared. Disk images can be BIN/CUE, ISO and are stored on the MicroSD card. There is also a special edge case for the HP 200LX, where the card can emulate an “Accurite Doubleslot” device, allowing an emulated flash card to coexist with networking or sound functionality. This is particularly important on systems with only a single PCMCIA slot, where storage availability is at a premium. # USB The USB port for the RP2354 is made available on the external connector. It’s primary purpose is to be used for flashing the card with firmware, however as demonstrated on the PicoGUS and PicoMEM, it can use used for USB Gamdpads and USB Mice which are presented the the host system as legacy gamepad and serial mouse. It has also been demonstrated the latest update to the PicoGUS that accessing flash storage at a reasonable speed is possible via USB.
www.yyzkevin.com
October 29, 2026 at 7:35 PM
i was gonna guess ethernet pcmcia card
October 26, 2026 at 1:53 PM
I still remember the alternative expansion for PCMCIA: People Can’t Memorise Computer Industry Acronyms.
October 26, 2026 at 7:32 AM
honestly i have a cf card and pcmcia adapter so pcmcia would be great but the driver situation is… weird on OS/2. im also not sure what the best way to share files over the network is with OS/2 is. probably ftp or a vm running os/2.

but there are drivers for the irDA chip it has.
October 26, 2026 at 2:16 PM
it needs pcmcia wifiiiiii
October 26, 2026 at 5:32 AM
- IR sensor
- DVD, SD, Pro Memory Stick, Smart Card, PCMCIA Card, Modem slots
- 3x USB ports
- 2 BATTERIES (ones dead and ones missing :(
- Specs pretty good for 2007 (same for my MacBook 2007)

the only true problem i have is the OS, as its running Win7, and it shows it wasnt made for it lmao
October 26, 2026 at 12:31 PM
i had a compaq ipaq with a battery extender, pcmcia expansion (i used an ethernet card or modem card depending), and a targus folding keyboard and it rocked.
October 22, 2026 at 5:51 PM
I had PCMCIA cards for: an extra CF card slot, 10 megabit Ethernet, Wi-Fi, and an IBM PCMCIA hard disk. Worked great for backing up my Kodak DC215 digital photos @ the 2002 Winter Olympics each evening.
paulhutch.com/images/photo...
October 17, 2026 at 12:12 PM
That was my one and only mobile computing platform from 2000 to 2010. Way easier to bring to a workbench, carry on vacation, or use in the field than the laptops of the day and powerful enough for all the basics. The built-in 56K modem, separate TIA-232D serial port and, PCMCIA were priceless.
October 17, 2026 at 12:12 PM
X-Jack should’ve never died as a standard.
October 15, 2026 at 9:33 PM